PDA

View Full Version : QSC RMX2450 & PLX3402 internal pics



thylantyr
01-08-2006, 11:49 PM
pics & babble

http://www.caraudioforum.com/vbb3/showthread.php?p=1822261#post1822261

joetama
01-09-2006, 12:32 AM
Actual used to use QSC MX-1500a amp to run my B&W DM330i's. Also used a dbx 2231 EQ and an Alesis Studio 12R for pre-amp. Sounded Very Very Very sweet QSC's sound **** good.

-AG

thylantyr
01-09-2006, 02:04 AM
Pro amps - best kept secret in home audio .. if one dares to accept some
fan 'wind' noise ...:yumyum:

joetama
01-09-2006, 02:46 AM
If your doing it right, when the sound is up you shouldn’t even hear the fan noise. When I was running the QSC's you didn't hear the fans because they were hardly ever on, the amps being 350W per channel and typical listening volume on the 330's is 35W. So they were only running at 10% output, which I did because the more head room you have the less the transistors have to push and pull equaling less distortion, and there was very little distortion.