PDA

View Full Version : Box for '93 Caddy Sedan Deville 2 - DD9515's



bumpn_gt
12-28-2005, 07:15 PM
Can anyone help me out with how the hell I am going to fit 2 - Digital Designs 9515's (D series) into my trunk?!?!:eek: ??! I have a total height of 15.25" throughout the entire trunk......the dimensions are all wack...:crap:

The only things I have been able to come up with are a slant box or having the subs fire up.......:mad:

I will be using a Powerbass xa3000d on each. I am going for something insane loud for street.....not all out SPL. (btw, I have the electrical to run all this if you are wondering :naughty: )

If someone could help me out, that would be stupendus (sp?)!!!

feel free to contact me on AOL - bumpngt

If it is someone that designs boxes, I will purchase the design from you barring that it fits into the trunk

After further review, I will need a T box designed......someone help me out!!?!?

bumpn_gt
12-28-2005, 07:20 PM
http://img450.imageshack.us/img450/5454/trunklol3mf.th.jpg (http://img450.imageshack.us/my.php?image=trunklol3mf.jpg)

1loudsuv
12-28-2005, 07:25 PM
i say making it like 10 inches tall or so and facing the subs and ports up. but will have to use the whole trunk and it wont be an eazy box to make. and tune.

bumpn_gt
12-28-2005, 07:30 PM
I'm not worried about it being easy.......thats what all the fun is about!!!


Just want the ***** to fit!!

bumpn_gt
12-31-2005, 11:56 AM
bump it up!

djman37
12-31-2005, 12:01 PM
pm moe lester. he's got experience with the subs and box making.

bumpn_gt
01-01-2006, 06:02 PM
bump it up.......need someone that can design a T for me!

packerfan
01-01-2006, 07:55 PM
I made a design for a T shapped box...its about 12.75 cu ft after wood displacement. I should fit in your trunk but making a box out of cardboard first would be a good thing. Hit me up on AOL.

Slowd N Throwd
01-01-2006, 07:59 PM
http://img450.imageshack.us/img450/5454/trunklol3mf.th.jpg (http://img450.imageshack.us/my.php?image=trunklol3mf.jpg)
lol do you have 20'' 150spoke rims on there?
if so i bet that looks so clean on that caddy

pwnt by pat
01-01-2006, 08:08 PM
Know how to fiberglass?

bumpn_gt
01-01-2006, 10:03 PM
lol do you have 20'' 150spoke rims on there?
if so i bet that looks so clean on that caddy

I did, sold them, and now looking to get some other 20s for it....

bumpn_gt
01-01-2006, 10:04 PM
I made a design for a T shapped box...its about 12.75 cu ft after wood displacement. I should fit in your trunk but making a box out of cardboard first would be a good thing. Hit me up on AOL.

sorry homie.....thats WAY too big

bumpn_gt
01-01-2006, 10:07 PM
Know how to fiberglass?


I have the mold complete, just have no clue where to go next......no clue how to port it, or find out internal volume.......

packerfan
01-01-2006, 10:17 PM
sorry homie.....thats WAY too big

You can make it smaller lol :laugh:

bumpn_gt
01-01-2006, 10:26 PM
You can make it smaller lol :laugh:
kinda defeats the purpose if I don't have a design in the first place....

bumpn_gt
01-02-2006, 01:03 PM
bump it up////

pwnt by pat
01-02-2006, 01:36 PM
http://img.photobucket.com/albums/v398/pwntbypat/caddy.jpg

The orange is fiberglass.
The red is wood.

bumpn_gt
01-02-2006, 01:38 PM
I currently have the mold done.....I guess I was just trying to go the easy way......

maybe my only option is to finish it and hope it turns out decent???

bumpn_gt
01-02-2006, 01:45 PM
here is the mold I started....

http://img328.imageshack.us/my.php?image=img16985ub.jpg
http://img328.imageshack.us/my.php?image=img16992ln.jpg
http://img328.imageshack.us/my.php?image=img17009bt.jpg

pwnt by pat
01-02-2006, 02:14 PM
yuck

I think i'd start over, or finish. whichever was easier

bumpn_gt
01-02-2006, 02:39 PM
^^^^^

never said I was any good at it.....that was my first try......

I didn't realize I could lay some mdf on the bottom and call it good....so I did the entire thing.......


I may cut the middle out and just lay mdf in there.....will make it easier for me to do a port that way....

NhustlaR
01-02-2006, 11:41 PM
yes it will, make the bottom and middle chamber piece mdf, along with the port piece, then hot glue the rings on the way you want, and lay fleece over, staple, glass, sand, bondo, sand some more, bondo, sand a little more,bondo, sand one more time, bondo again, finish sand, primer(duratek), wet sand, paint. game over.


haha cept its a little harder than it sounds :)