View Full Version : Port Area for a.....

12-21-2005, 09:06 PM
Okay, this will be my last box thread, I will make the Fing thing tomorrow and Friday and finally get this subwoofer in...

So I decided to make a slot ported box that will be 5 cubes before displacement and tuned to 31Hz. I would like to know what kind of port area I should aim for during this project. The driver is a 15" Beyond Audio Inhuman, DVC 2,single spider I believe....

12-21-2005, 09:53 PM
Bump, I came up with something if someone wants to check the numbers for me...

external dimensions:
28" W x 17.5" H x 25" L
Port- 5" W x 16" H x 35" L

It should come out to ~31Hz (or around there according to BB6)...

12-21-2005, 09:55 PM
That should be fine man.

12-21-2005, 10:05 PM
That should be fine man.

You told me that I could use small PVC piping in the corners instead of cutting 45's, would I also be able to use small wooden dowels?

Also, IceTeeBone reccomended me to use dowels for bracing, would one dowel from from to back baffle be enough?

12-21-2005, 10:19 PM
Hmmm dowles would work but i recomend using threaded rod. Try the dowles and if its still flexing add some more bracing until it stops :)

12-21-2005, 10:20 PM
What about 2 x 3 studs? maybe a single one for bracing?

12-21-2005, 10:25 PM
WinISD comes up with the box being 29Hz..