PDA

View Full Version : Box Numbers (maybe NG? :D )



PhatTonyDeMarco
12-16-2005, 11:24 PM
Okay well my previous box would not fit into my car, so this time I measured correctly and I am going for a slot port instead of my previous PVC vents.
I have used BB6 a bit to get the size and what not, but it does not calculate if there is a bend in a slot port. So I was wondering if someone would be so kind as to let me know if all of these numbers are correct (since I came up with them on my own basically, from bb6's dimensions for my needed cubic size).

http://img225.imageshack.us/img225/2676/untitled24bq.jpg


Red: 16 x 23.25
Purple: 16 x 28
Blue: 16 x 20.5 (x2)
Yellow: 16 x 16.5
Green: 16 x 13.25
Teal: 28 x 22 (x2)


It should come out to 17.5" H x 28" W x 22" L
Port is 16" H x 4" W x 30.5" L

Anything that is wrong please correct me on, or any suggestions on a different size/design just let me know.

PhatTonyDeMarco
12-16-2005, 11:57 PM
Would like this answered by tonight so I can get the wood tomorrow right after work...

PhatTonyDeMarco
12-17-2005, 08:21 AM
bump

ngsm13
12-17-2005, 10:49 AM
I'm at work now, I'll try to check it when I get home...

NG

PhatTonyDeMarco
12-17-2005, 06:41 PM
I'm at work now, I'll try to check it when I get home...

NG

Thanks man.

ngsm13
12-17-2005, 07:01 PM
Still at work till 11:30 pm :(...*****... working 7am to 11:30pm...

NG

PhatTonyDeMarco
12-18-2005, 09:55 PM
:(

PhatTonyDeMarco
12-19-2005, 08:50 PM
bump

PhatTonyDeMarco
12-19-2005, 10:01 PM
Final ask for assistance.

Jordantyler
12-19-2005, 10:05 PM
what website did u get that from?my friend used a diagram from a website like that and the box sounded like ****.. just puttin my 2 cents in

iceteebone
12-19-2005, 10:09 PM
i came up with 3.6 cubes tuned to 35 hz. i did not however figure in driver displacement.

PhatTonyDeMarco
12-19-2005, 11:09 PM
what website did u get that from?my friend used a diagram from a website like that and the box sounded like ****.. just puttin my 2 cents in

I came up with that on my own, using bb6 a bit, the picture was made in Paint....