PDA

View Full Version : Check These Plans



Chevyaudio
12-15-2005, 03:13 PM
http://i31.photobucket.com/albums/c393/chevyaudio/CVRPorted4Cubes35Hz.png

Will someone Check these for me. They are for a 15" Kicker Comp VR. 4 cubic Feet, Tuned to 35 Hz.

mustangowner
12-15-2005, 03:39 PM
looks good to me

Chevyaudio
12-15-2005, 03:58 PM
Just to make sure, the port is 3 inches between the backwall of the box, and the piece of the port that is 12.25"

mustangowner
12-15-2005, 04:11 PM
i was sure it was, i didnt question it.

Chevyaudio
12-15-2005, 05:54 PM
Bump...Just to make sure

Alpineinstaller
12-15-2005, 05:56 PM
Tuned a little low for SPL isnt it?

Chevyaudio
12-15-2005, 05:57 PM
Ill probably build 3 boxes over Christmas. Im gonna build the one Saywhat designed for HT, One for SQL, and one for SPL

this is obviously SQL

Alpineinstaller
12-15-2005, 05:58 PM
Ah

Alpineinstaller
12-15-2005, 05:59 PM
he designed that one box for HT. Hell i thought it was for the RL-p's

Alpineinstaller
12-15-2005, 06:00 PM
How tall is it?

Chevyaudio
12-15-2005, 06:02 PM
naw, The Rl-ps are going into a sealed box that it 3 cubes total after displacement (so 1.5 apiece). All of the ported boxes are for the CVR.

Alpineinstaller
12-15-2005, 06:20 PM
How tall is the one in the plan at the top.

Chevyaudio
12-15-2005, 06:30 PM
Its pretty big, Its 25" tall, 25" wide, and 19" deep

Chevyaudio
12-15-2005, 08:50 PM
http://i31.photobucket.com/albums/c393/chevyaudio/CVRPorted4Cubes35Hz.png

BUMP, Here is the box. I reposted the plans just so yall dont have to scroll to the top.

Chevyaudio
12-16-2005, 12:19 AM
One Final Bump

baseballer1100
12-16-2005, 12:54 AM
why is the left side larger then the right?

Moe Lester
12-16-2005, 04:15 AM
its not, he just decided to label it where the pieces would individually be placed, however with the joints drawn as 45s its not easy to read.

what i dont get is where you said it was 25 x 25 x 19, yet it shows 19.5 deep on one side.

mustangowner
12-16-2005, 09:43 AM
why is the left side larger then the right?


i think the dimensions he gives are board lengths, because if u notice on the left side the board comes all the way to the front of the box. on the right side the side board meets the front board....do math....19.5-18.75=0.75" (board thickness).

saywhat?
12-16-2005, 10:05 AM
i believe the one i made u is actually 30 inches tall. correct me via the plan if im wrong, its been a few days lol.

saywhat?
12-16-2005, 10:08 AM
its not, he just decided to label it where the pieces would individually be placed, however with the joints drawn as 45s its not easy to read.

what i dont get is where you said it was 25 x 25 x 19, yet it shows 19.5 deep on one side.
not sure where he got that, the one i designed for HT does not match those demensions.

Chevyaudio
12-16-2005, 12:30 PM
2 different boxes. Saywhat Im building your box for HT. Im building this one for SQL. Sorry bout the 45 degree angles. And Yes moe your right, it is 19.5 (that was a typeo on my part. Thanks everyone.