PDA

View Full Version : box plans from saywhat?



sanmarcosZfreak
12-14-2005, 09:13 PM
jsut wanted to show u all the plan i got for my 2 reSX12"s from saywhat?

its 3.8cuft ported tuned to 35Hz

*rough pic*
http://img.photobucket.com/albums/v237/Calpolyjuggalo/calpolyhuge3post.jpg

the lil square up front will be some sort of window, either a square or a logo of some kind, the box will have interior lighting (2 12" cold cathode PC case lights) for that extra lil sumthing

nissanrider06
12-14-2005, 09:15 PM
looks nice, u know any links on how to add window?

wlmrs
12-14-2005, 09:16 PM
looks interesting.hope it sounds good.

btnhfan
12-14-2005, 09:16 PM
Make sure the window is 3/4" thick

sanmarcosZfreak
12-14-2005, 09:18 PM
looks nice, u know any links on how to add window?

i dont have any links but i have an idea on how to make it work

the window will have two peices of plexiglass one inside, one outside, flush with the wood

i'm thinkin 2 peices of plexi 1/4in thick, so it would be 1/4 of plexi 1/4 of wood, and 1/4 of plexi

wiht a sealent between then and screws for extra grip

saywhat?
12-16-2005, 11:22 AM
bump: i need business lmao

ramos
12-16-2005, 11:47 AM
i dont have any links but i have an idea on how to make it work

the window will have two peices of plexiglass one inside, one outside, flush with the wood

i'm thinkin 2 peices of plexi 1/4in thick, so it would be 1/4 of plexi 1/4 of wood, and 1/4 of plexi

wiht a sealent between then and screws for extra grip




So your going two pieces of 1/4" plexi with a 1/4" air gap in between. Not a good idea. It's not going to last very long :)

PatFitz9
12-16-2005, 11:58 AM
i would make it a solid piece. and make sure it is in there tight. windows rattle easily

ramos
12-16-2005, 12:55 PM
I still say a 1/4" two pieces or one, isn't strong enough for the intended application :)

sanmarcosZfreak
12-16-2005, 01:00 PM
I still say a 1/4" two pieces or one, isn't strong enough for the intended application :)

as i said in the other toher thred, 1/2" lexan window

ramos
12-16-2005, 01:14 PM
There is a big strength difference between one piece 1/2" thick as opposed to the two 1/4" thick pieces you posted above. I would still go 3/4" just to be safe. But as always brother man that just MHO :)

sanmarcosZfreak
12-16-2005, 01:34 PM
There is a big strength difference between one piece 1/2" thick as opposed to the two 1/4" thick pieces you posted above. I would still go 3/4" just to be safe. But as always brother man that just MHO :)

and i spect that, but for the look i want if i go 3/4 i would need to put anthoer sheet of MDF up front BUT then it woudln't fit in the car nemore

saywhat?
12-16-2005, 05:11 PM
we will get it done where it works, and is not going to break. i dont want that. im trying to get a good rep with box building so i dont want my prducts to be shoddy work. also, its not a square its a design, smaller than that window. so strength will be added there as well.