PDA

View Full Version : componant help



saywhat?
12-04-2005, 09:52 PM
i need some componants that will get loud off of 100 watts. my type r is pretty **** loud and i want the componants to be as loud or louder. i dont care much about how "smooth" thye are but i do want them to blend in response wise.


i would like to keep the budget around 150 give or take a 20.

saywhat?
12-04-2005, 09:54 PM
http://www.cardomain.com/item/JBLGTO506C?vq_id=none#reviews im looking at these
http://www.cardomain.com/item/KIC05DS525?vq_id=none <--for rear fill

all along side an Orion 4004

my question is, can i run two channels at 2 ohm (front speakers) and two channels at 4 ohm (rear speakers) or does it all have to be the same?

saywhat?
12-04-2005, 11:06 PM
any help is appreciated!

saywhat?
12-04-2005, 11:33 PM
some opinions would be lovely.

dak0ta_g33k
12-05-2005, 12:03 AM
well i run relatively weak mtx 4500 10" subs, but i amp a 4 ohm RE component set and 2 ohm RE XXX 6.5s off an mxa 6004 (75w/channel @ 4 ohm, 150w/channel @2 ohm) no problem for the two weeks i set this up...

saywhat?
12-05-2005, 08:51 AM
i dont have that kind of room, thanks though. i dont know if i should do some glass work and go for door pods, or just use stock plasment.

jojosdad
12-06-2005, 01:54 AM
I would look for a componant set with a high sensitivity (around 92db).For $150
you have alot of choices especially if you go the ebay route, but I would avoid buying anything used.I just purchased a 6x8 Audiobahn componant set off of ebay for a great price but can't recommend them cause I haven't installed them yet.

bikejunkie223
12-06-2005, 03:29 AM
Try some Polk db6500's they sound pretty decent.