PDA

View Full Version : type r ported box



saywhat?
11-28-2005, 08:51 PM
alright, whats a good size to have for this sub to play nicely? im not talking TCAB humongous box size, but a rather loud street beat setup. what should i go for (after all displacement)


1 12 type r

_Neon_
11-28-2005, 08:54 PM
lol no clue....go look up specs for it....i know when ur porting it go with around 30 htz for rock and around 35htz for rap

XtrmAudioCncpts
11-28-2005, 08:56 PM
1.5-2cubic tuned to 33hz

saywhat?
11-28-2005, 09:20 PM
ill go 2 cubes then, cuz im sealed at 1 and its pretty loud, DECENT. so 2 cubes it is.

Mr. Opportunist
11-28-2005, 09:28 PM
2 cubes sounds decent...

amartin_72
11-28-2005, 10:23 PM
Hey i have a dual 4 ohm type R 12 new model, i have had it in a 1 ft sealed, 2 ft sealed, 2.2 ported at with a 2.75x11 port so about 30 in squared port tuning about 32 hz, and a 2.7 with about 60 in squared port tuning about 40 hz, the first ported was by far the best it handles about 850 watts from my kenwood 1000wRMS but the two sealed boxes dont produce near the sound, i have had the two ported boxes in a caddilac deville, mistu eclipse, chevy lumina, and my girlfriendsdodge neon, the caddilac with the 2.2 at 32 was decent , and the mitsu being a hatch and the neon with the seats down was pretty loud probably about 140 db with no cap just amp and sub thrown in the trunk. having the 60 in port are and high tuning seemed to KILL the power handling, it sounded like ish with the volume up, so keep the port area at about 30, maybe a bigger box than 2.2 if you have room, about 2.5 and keep the tuning low, it will really really hit those lows if you adjust your eq to peak low. hope this helps, as i have tried to put my type R in as many vehicles as possible. i know i dont use many periods and that was one big sentance. but i **** at writing to understand.

bjfish11
11-28-2005, 11:04 PM
Hey i have a dual 4 ohm type R 12 new model, i have had it in a 1 ft sealed, 2 ft sealed, 2.2 ported at with a 2.75x11 port so about 30 in squared port tuning about 32 hz, and a 2.7 with about 60 in squared port tuning about 40 hz, the first ported was by far the best it handles about 850 watts from my kenwood 1000wRMS but the two sealed boxes dont produce near the sound, i have had the two ported boxes in a caddilac deville, mistu eclipse, chevy lumina, and my girlfriendsdodge neon, the caddilac with the 2.2 at 32 was decent , and the mitsu being a hatch and the neon with the seats down was pretty loud probably about 140 db with no cap just amp and sub thrown in the trunk. having the 60 in port are and high tuning seemed to KILL the power handling, it sounded like ish with the volume up, so keep the port area at about 30, maybe a bigger box than 2.2 if you have room, about 2.5 and keep the tuning low, it will really really hit those lows if you adjust your eq to peak low. hope this helps, as i have tried to put my type R in as many vehicles as possible. i know i dont use many periods and that was one big sentance. but i **** at writing to understand.
wow...you do **** at using periods. Someone call the guiness book of world record people, thats a long *** sentence. lol.

PowerNaudio
11-29-2005, 07:19 AM
well, you know my aim.