PDA

View Full Version : An Easy Box Design Calc..



bholtmeier
11-26-2005, 11:03 AM
I'm sure alot of you have seen this, but for those of you that haven't, it works WELL and is very simple and to the point. Here Ya Go:

http://www.accelerator-pedal.com/l-ported-box.htm

406er
11-26-2005, 02:55 PM
old news

Pyro_By_Nature
11-26-2005, 04:53 PM
Old news, and it ***** IMO.The port area it gives you is just pathetic.

Pyro_By_Nature
11-26-2005, 04:57 PM
Net Volume: 500.49 cubic feet
Tuning Frequency: 25.11 Hz
Port Width: 3 inches
Port Area: 46.5 Square Inches
Port Length: -5.25 inches

External Dimensions: 42 wide x 17 tall x 1379.5 deep.

Board Dimensions and Quantity
Color Count Width Height
Top and Bottom 2 42 inches 1379.5 inches
Red 1 38.25 inches 15.5 inches
Yellow 1 1378.75 inches 15.5 inches
Black 1 40.5 inches 15.5 inches
Green 1 1379.5 inches 15.5 inches
Teal 1 -7.5 inches 15.5 inches

Number of 49x97 Sheets of 3/4" MDF: 33.75



Ohhhhhhhh yeah, I'd really trust this caculator with my box.........riiiiiiight.

Pyro_By_Nature
11-26-2005, 04:59 PM
I threw the t/s specs. in there for fun for 2 memphis power reference 15's.

No thanks.

Chevyaudio
11-26-2005, 05:19 PM
It doest work good, I talk to Flako, I think he made a box using it, and He had a ton of port noise.

matt_martin87
11-26-2005, 06:24 PM
Can anyone recommend a GOOD ported box calculator?

I was about to use the accelerator-pedal one, but since it apparently *****, I need another calculator.

bholtmeier
11-26-2005, 07:13 PM
The newer version *****, but the older version works just fine. i have 0 port noise so i have no idea what you guys are talking about.. oh well