PDA

View Full Version : Need 6.5" & 4" x 6"



Green1340
11-16-2005, 09:35 AM
I am putting together a system for 02 Silverado regular cab. Here is what I have so far:

Amp: Soundstream XTA 600.5- 90w x 4 + 240w x 1 @ 2 ohms (half that for 4ohm)

Sub: Kicker Comp VR102 in a ported box.

HU: Factory Chevrolet.

I need your input on 6.5" speakers for the front & 4" x 6" speakers for the rear.

Thanks for your help.

squeak9798
11-16-2005, 11:49 AM
You want components or co-axials?

Budget?

Green1340
11-16-2005, 05:09 PM
Looking for co-axials. As for budget, $100 pair max. :-)

JoseMCeee
11-16-2005, 05:26 PM
polk audio speakers arent bad and work nice with deck power. Im sure they will have way more midbass and clarity with that amp you have. You can probably get some Polk components for around 100. The 4x6s should go not over 70.

tplaya07
11-16-2005, 06:24 PM
You can also check out the Infinty 4x6" plate speakers. I've had pretty good results with them. You should be able to get them on Ebay for around $50-60, if not less.