PDA

View Full Version : Firing port sideways



CKY
11-16-2005, 10:10 AM
is there a problem with firing the port sideway out of the box? i have this local shop and he does this with every box he builds ...

Thanks.

SBLAZER
11-16-2005, 10:12 AM
naw, there isnt. custek used a box similar to that and worked pretty well for a single 15R. he had ports firin to the side and sub forward.

NhustlaR
11-16-2005, 10:12 AM
no, but it might be bad if you have the box sitting sideways and its blowing right into the side of your trunk....other than that its strizzle

IamDeMan
11-16-2005, 10:23 AM
I used to see that configuration a lot back in the day. They usually were able to fit a longer port that way than on the front is my guess for the placement. It still works as intended.

Omarvelous
11-16-2005, 02:27 PM
I used to see that configuration a lot back in the day. They usually were able to fit a longer port that way than on the front is my guess for the placement. It still works as intended.

I think that would be the functional purpose, to get it to fit. Other then that u MOST likely won't notice the difference.

+ it's clean, hides the port

CKY
11-16-2005, 03:09 PM
thanks a bunch guys :thumbsup: