PDA

View Full Version : 6x5's or components?



bdavies11
11-14-2005, 02:17 AM
I have a set of pioneer 6x5's up front im my door panels and the stock speakers in the rear. Now, the stock speakers (which are the monsoon speakers) still sound pretty good with my HU but i was woundering if i should get a set of components for my front speakers and move the 6x5's (which are up front now) to the rear. Or, should i leave the 6x5's up front and get a set of 6x8's or 6x9's for the rear. When I crank the volume up i cant really hear my fronts beacuse the rears get way louder even tho my fading is equal from front to rear and side to side. Im not going to amp my speakers right now although i may in the future. Im looking for good sq and of course something that can get loud with no distortion.

M@nJo
11-14-2005, 04:00 AM
try fading the speakers to the front since thats what you hear most.

i would defiantely invest into components and put those on the front and take those pioneer 6.5" and hook those in your rear. but your gonna hear some distortion at high levels no matter what if your not gonna amp them.

bdavies11
11-14-2005, 04:27 AM
Well my right front speaker likes to pop at about 70% volume and up, ( which is why i dont fade the speakers to the front) but i know theres nothing wrong with the speaker becasue they are new and i had the same problem with my stock right front speaker. I replaced them and the popping isnt as bad as it used to be with the stock speaker but its still there. The left front and rear speakers i have never heard any distortion what so ever from them no matter how high i go on the volume and they sound great even at around 90% volume.