View Full Version : Viper 791XV install, Pontiac TransAm!! Help!!
11-12-2005, 04:56 PM
I haver a Viper 791XV I am tryin to install into my 1993 Pontiac TransAm. Anyone out there know about this alarm, and possibly going into this car, or a Camaro from 93-97? If so please IM me on AIM @ MxRacer476, asap!! I'm tryin to get this alarm installed by tonight, so I can install the dash, and starting putting interior back into the car tomorrow. Mainly need help with the door locks, and varifying I'm gonna wire the relay's correctly. I am knowledgable, so you wont be dealing with a newbie, I just haven't done a full alarm by myself.
11-15-2005, 01:20 PM
11-18-2005, 01:57 AM
11-18-2005, 02:15 AM
That helps out with NOTHIN, I already had that info, and a lil more in depth, I just wanna verify I'm reading the relay wiring diagram right....If anyone can help IM me on AIM, as asked in the first post...
11-18-2005, 11:53 AM
ur relay diagram should be on the back of the relay package. or u can just call the local shop and ask them kuz not to many people read this section
11-18-2005, 11:59 AM
That helps out with NOTHIN, I already had that info, and a lil more in depth, I just wanna verify I'm reading the relay wiring diagram right....If anyone can help IM me on AIM, as asked in the first post...go to www.bulldogsecurity.com they have diagrams of how relays are wired trust me a very good website for info on car alarms.simple try it out PS type in www.bulldogsecurity.com this will get you the info you need
11-21-2005, 02:47 AM
Just get a 451M, it will make life Alot easier for you.
12-03-2005, 02:38 PM
Is anyone online right now, on AIM, AOL, or Yahoo Messenger to where they could help me out? If so please contact me asap! SN is MxRacer476...
12-03-2005, 09:48 PM
12-03-2005, 10:03 PM
I was wondering if you could help me out with the Alarm, and sesnors I'm putting into the car. I will include a list of the Alarm, and sensors below, as well as a diagram of the relays what my post layout is like. Then if you could show me a diagram of the setup like a drawing of the wires from each sensor, and like connect the dots to where they go, and what color wire in the car they attatch to I would appreciate it...I have 3 relays as well...Power wire will be a 10 ga. wire...Will the ground need to be the same, or 12, or 16 ga. sufficient since that's all that's coming out of the brain of the unit? Also if I soder in extensions to reach some wires, what size wire should I use, of the 3 listed above. As far as the 3 mini sirens, and 2 nero sirens do I wire the 3 in series, and the 2 nero's in a series, or what? Hopefully your drawing or diagram can help out. Also my 530T I guess didn't come with the papers for it to show ya what harness goes where...
Viper 791VX Alarm with factory components included plus the following:
EL Viper Display
3, 513T Mini Sirens
2, 514N Nero Sirens
451m Door Lock Interface
530T Window Module
520T 12v Backup Battery
508D Motion Sensor
506T Glass Break Sensor
507M Tilt Sensor
PS. The Relay Schematic layout is attatched. Hope you hear from you soon!
My AIM, AOL, and Yahoo Messenger name is MxRacer476 please get in touch asap!! Thanks...
12-03-2005, 10:05 PM
Dont know anything about the alarm problem...but do you have any pics of your car...thats what i want for my next car is a 1993-1997 TA WS6...and i would like to see what you have done with it...