PDA

View Full Version : simple T-port calculation



SSS 18734
11-04-2005, 10:53 PM
I'm going to try and build get a new box built tomorrow, and since I have nothing to do this friday night, im going to put together some plans for a new box. Heres what I have for the 2000SPL's:

3.5 cu.ft.
34hz tuning
port should be 5" x 13", and about 38" long

But I don't really want to have the subs on one side, with the port on the other. How would I calculate it so that I can have a single port in the middle? I tried searching but didnt really find a result I could use.

SSS 18734
11-04-2005, 11:08 PM
bump. come on. im trying to get this done here and I need an answer!

xmax-1
11-05-2005, 01:41 AM
You calculate it the same as if the sub was at the end. Are you doing the subs in a common or seperate chamber enclosure?

Chriscivic
11-06-2005, 10:49 PM
no, i think he is talking about having a single chamber boc that has one port going down the middle and then t'ing off each direction, hard to explain, but i would like to know as well.

Moe Lester
11-06-2005, 10:50 PM
no, i think he is talking about having a single chamber boc that has one port going down the middle and then t'ing off each direction, hard to explain, but i would like to know as well.

no hes not