View Full Version : fiberglass box for my camaro

3rdGen V8
10-12-2005, 03:10 PM
i have a question about converting gallons to cubic feet. How do you do it? Also, would this be correct, So 53 gallons / 7.481 = 7.08 cubic feet, if my gallons in a cubic foot are correct. For more info on this box go to this link, http://thirdgen.org/techbb2/showthread.php?s=&threadid=233634 , and start reading at the 8th post. I want to put 2 or 3 mtx 7500s, ported in it. I made a previous post about doing, this but i was told that i didn't have enough air space.
I now know that i have enough airspace. Also, what would be the correct tuning of the port to get the bass to me in the drivers seat.

Box info:
7.5 cubic feet
will ouse 2 or 3 mtx 7500
totally fiberglass

10-12-2005, 03:19 PM
If I ever have troubles doing conversions, I go here: http://www.onlineconversion.com/

Really simple and quick.

3rdGen V8
10-12-2005, 07:37 PM
thanks but i need some info on tuning the port

10-12-2005, 10:51 PM
depends on your application; spl, sq, sql???

3rdGen V8
10-13-2005, 03:54 PM

Pop da Hatch
10-13-2005, 04:19 PM
1 gallon = .134 cubic feet

10-13-2005, 04:23 PM
I was told that there wasnt enough space...because i wanted to do a box for my camaro too...if you figure it out post some pics...and some specs...

10-13-2005, 04:24 PM
Are you asking what tuning is good for spl? 38 and up, but i find that around 40-44 is about as high as i would want to go for a daily setup

3rdGen V8
10-13-2005, 06:59 PM
hey chris 96 i don't think i could help you because this is for an 89. and chevy audio would the bass get to me in the drivers seat, also don't you tune the port by making it a certian length if so what would the length be