View Full Version : Using a 10" Sub for Midbass?
10-10-2005, 10:58 PM
Hi, I have a new amp that is 4 channel, it will do 75Wx2 + 300x1 @ 4ohm. I lack some midbass, and am wondering if I could use a single 10" on the 300W output for midbass? If this is possible, and would work, what freq should I be setting the 10" @ for mid bass?
10-11-2005, 01:15 AM
Uhhh.. let's see where to start with this one..
YES, it will work, but it won't work like you think it will. Midbass is stereo, so it'll be a very unnatural midbass.
If you can find a good pair of 10s that can handle midbass, by all means rig those babies up and let us know how it goes! Otherwise, a pair of 8s off the 75x2 would probably do better.
10-11-2005, 12:05 PM
Any suggestions on a mid-bass worth driver that does well on 300W RMS for both?
RE XXX 6.5" drivers? :naughty:
10-11-2005, 12:06 PM
yeah i wouldnt do anything as big as a 10 i would say 8 or less
10-11-2005, 06:42 PM
Well, Here's the scoop. I cant use anythign besides Alpine gear. This is where the 10" Type-R comes into play. As they dont sell a midbass driver alone. I am staying all Alpine in my ride, so anything other than that is not really ideal.
SO back to having 2 10" subs for midbass ONLY -- Is this ok? I know you arent supposed to mix/match subs, but the 10" wouldnt really be used as a sub... Just really big mids ;) hahha..
What are the disadvantages to this?
10-11-2005, 06:44 PM
Whats the price tag of XXX drivers?
~$259 for a pair of the XXX mids.