PDA

View Full Version : 3rd gen camaro box



3rdGen V8
10-10-2005, 12:12 AM
I am going to build a box for an 89 camaro. The box is going to be ported, and will house two mtx 7500 12s. It will be upfiring in the rear hatch storage area.The box, according to the website that i found, is about 2.4 cubic feet. here is the link for the deminsions, http://thirdgen.org/techbb2/showthread.php?threadid=306257 . The only problem i have is tuning the port. i realy want the box to be ported and upfiring. So my question is what would i need to tune the port to to get the base to me in the drivers seat. Also, explain to me how to tune the port, the box will be divided into two seperate chambers so each chamber is about 1.2 cf. Any help would be greatly appreciated.

PhatTonyDeMarco
10-10-2005, 12:15 AM
2.4 cubic feet would not be enough space for those drivers to be ported. Especially since that is before displacement of subwoofers and ports.

3rdGen V8
10-10-2005, 12:18 AM
how many cf do you think i would need

PhatTonyDeMarco
10-10-2005, 12:20 AM
I would say somewhere around 2.4 per driver, net volume. Those subs should get decently loud in a sealed enclosure back there, and sound awsome. What amp are you running?

3rdGen V8
10-10-2005, 12:22 AM
Not really set on anything yet, but any recomindations are welcome.

PhatTonyDeMarco
10-10-2005, 12:26 AM
Are those subs DVC 4 ohm or SVC?

3rdGen V8
10-10-2005, 12:33 AM
SVC, I would like to stay all mtx, but all suggestions are welcome, I would like to stay betwwen 1200 and 1400 for the price range for the whole system. Also, what would you think of geting rid of the rear seat and puting an mtx sledgehammer box back there.