PDA

View Full Version : Need to replace factory speakers in 99 Blazer



hawk45
10-09-2005, 09:46 PM
I recently got a "new to me" 99 Chev Blazer. Like new loaded. The factory stereo is nice but it is factory. I am going to be putting in my Apline HU and Atlas 12" so I need to upgrade the factory speakers. I will not be running an amp to these speakers

Dash (Crutchfield said only Pioneer 3-1/2" would work because of depth requirements)
Front doors (Crutchfield recommends 6-1/2")
Rear doors (Crutchfield recommends 6-1/2")

What do you recommend without breaking the bank? Any other suggestions?

Thanks,
Hawk

trevor87
10-09-2005, 09:49 PM
try ikesound.com

Dj-torn
10-09-2005, 09:56 PM
EBAY
Pioneer and Infinity work really good running of an HU and you have change left over

bamaboy
10-10-2005, 11:05 AM
have you checked you speakers in your dash mine are just tweets

and the thing about the blazer crutchfield says nothing good will fit in the doors because the tweet will hit the grill :( so i got components:)

hawk45
10-10-2005, 04:32 PM
Yeah, just checked.. they are just tweets under that 6x9 grill.... WTF? BTW... do you know how to get the dashboard off to replace the factory radio?

JoseMCeee
10-10-2005, 04:59 PM
lots of screws spreaded all over the dash most likely. For mine, I took off the vents, theres screws there, by the left side with the door open, that area is some, same with right side. And probably some where in the glove box maybe or under.