PDA

View Full Version : sub enclosures on eBaY



M@nJo
10-09-2005, 03:32 AM
im currently running two 12" kicker L7's in a sealed box (1cu ft per) and im looking to go ported.

i was browsing eBay and seen few boxes for my specific subwoofers:

1) http://cgi.ebay.com/PORTED-BOX-ENCLOSURE-FOR-2-12-KICKER-SOLOBARIC-L5-L7_W0QQitemZ5816473148QQcategoryZ14945QQrdZ1QQcmdZ ViewItem

2) http://cgi.ebay.com/DUAL-12-SOLOBARIC-SUB-BOX-MDF-S12L5-S12L7-L5-L7-KICKER_W0QQitemZ5815628776QQcategoryZ14945QQrdZ1QQ cmdZViewItem

3) http://cgi.ebay.com/ONIX-12-DUAL-VENTED-KICKER-SUB-BOX-L5-L7-SOLO-X_W0QQitemZ5815004999QQcategoryZ14945QQrdZ1QQcmdZV iewItem



are these boxes any good? i know there not built to spec perfectly, but it sure would get louder compared to my sealed right? lmk what you think about those boxes. this is in a honda civic coupe and im not worried about trunk space, but i would like it so i wouldnt have to remove my spare/cardboard piece like i had to with the 15" vented:emb:

flakko
10-09-2005, 03:38 AM
the sealed boxes seem fine, but for some reason, i dont trust the ported ones.

danteBirosel
10-09-2005, 03:49 AM
i highly dont trust any of them. for 40-50 bucks you can make your own bro.

M@nJo
10-09-2005, 04:50 AM
i would make my own, but im a complete noob at it. i know sealed shouldnt be hard, but i dont know how to tune it, measure the cubic, etc.

how much would you pay for a professional audioshop to build a ported box built to spec in my case? 3/4" mdf wood, no carpet, sub-ready

better yet, anyone in the bay area, california can do this?:greedy:

Raisedin305
10-09-2005, 05:49 AM
Wouldnt go with eBay boxes because I have personal experience with them. 1 of my 2 boxes cracked. It was a ported/vented 15" box for a kicker L7. It cracked and the other is still ok but it looks to be giving up any time. I only had it for two months. The actual port inside cracked.

THUNDERBIRD
10-09-2005, 11:53 AM
just get someone on here to make u some plans for a box with a cut sheet and start putting it together

trevor87
10-09-2005, 12:00 PM
just get someone on here to make u some plans for a box with a cut sheet and start putting it together

x2 jsut get someone to design one for your subs just give them the total amount of space you would be willing to use and they can design it and you can build it

fozzymuphet
10-09-2005, 12:06 PM
measure twice, cut once, and if you're putting it in the trunk make sure you measure the top lip to see how big of a box will actually go in. My box lost .25cubes and had to be retuned because of it....

danteBirosel
10-09-2005, 02:14 PM
yeah bro like what they said. but yeah if your are really stuck and want to build your own box. Give me a PMers.