PDA

View Full Version : Tweeter Size



danteBirosel
10-02-2005, 04:26 PM
I have a 1994 Nissan Pathfinder and i do not know the kind of tweeter i need. There are 2 in the front and 2 in the rear. What are its sizes and what kind of tweeters am i looking for?

squeak9798
10-02-2005, 04:57 PM
What exactly are you trying to do?

danteBirosel
10-02-2005, 05:11 PM
replace my stock tweeters with some aftermarket tweeters. Having aftermarket speakers on a 4 channel amp wont be a great combination when having 4 stock tweeters along with em.

So i need to know what size tweeters i need for my 94 pathy.

squeak9798
10-02-2005, 05:14 PM
replace my stock tweeters with some aftermarket tweeters. Having aftermarket speakers on a 4 channel amp wont be a great combination when having 4 stock tweeters along with em.

So i need to know what size tweeters i need for my 94 pathy.

What does the rest of your system consist of? How are you planning on powering them? How are you planning on crossing them over?

danteBirosel
10-02-2005, 05:21 PM
hmm i really dont know. If u check my sig.. thats my system right there. I dont know for sure but im taking a good guess that my stock tweeters are being runned with my 6x8 on the 4 channel amp. And having that as a problem, my speakers are not trully getting their right amount of watts in the speakers.

squeak9798
10-02-2005, 05:50 PM
If you have 3-way speakers in all 4 locations, IMHO it would be best just to ditch the idea of using additional tweeters all together.

More is not better ;)

danteBirosel
10-02-2005, 05:58 PM
so i should cut the connections of the tweeters?

SSS 18734
10-02-2005, 06:15 PM
so i should cut the connections of the tweeters?

if your using coaxials already, then yes.

When you upgrade to a component set, thats the time to replace those tweeters.

danteBirosel
10-02-2005, 06:20 PM
thank you very much. i will disconnect all of them asap.


disconnecting them by just using a cutter and cutting the wires wont hurt anything right?

SSS 18734
10-02-2005, 06:21 PM
thank you very much. i will disconnect all of them asap.


disconnecting them by just using a cutter and cutting the wires wont hurt anything right?

wrap electrical tape around the ends to make sure you dont get a short anywhere