PDA

View Full Version : Bondo Resin----help ASAP



negativezeroz
09-28-2005, 08:58 PM
Have to resin my particle board (yes I know..:crap: :blush: ) Problem...I had to invert a sub but different than usual so it's already in the enclosure. (the face baffle is siliconed in) Will the fumes damage the sub?

InhumanAcura
09-28-2005, 08:59 PM
no..

negativezeroz
09-28-2005, 09:00 PM
sweetness just had to make sure they wouldnt like screw the butyl surround over itself

mikescanlon
09-28-2005, 09:02 PM
as long as you dont hit the sub with resin.

resin + sub = bad stuff.

resin + box = good stuff.

dont use acetone in the box though or thin it with acetone.. acetone eats everything.

negativezeroz
09-28-2005, 09:03 PM
I'mjust using the Bondo resin and the supplied hardner

req
09-28-2005, 09:05 PM
have fun with it then :)

negativezeroz
09-28-2005, 09:06 PM
have fun with it then :)

:crap: :( this is the first time using resin so here goes nothing...

mikescanlon
09-28-2005, 09:53 PM
wear some **** gloves there buddy.

dont sniff that ****, you'll get ****ed up, unless thats the plan, then put it in a plastic bag.

wear 2 pairs of gloves if you want, it's no fun to get off your skin, and it burns after a while.

negativezeroz
09-28-2005, 09:59 PM
I didnt wear gloves, I have a headache, and my hands are sticky lol

mikescanlon
09-28-2005, 10:06 PM
well, you can get it off with acetone or other solvents.. or i noticed dish cleaner works pretty good to make em at least not sticky.

InhumanAcura
09-28-2005, 10:06 PM
I didnt wear gloves, I have a headache, and my hands are sticky lol

dawn dish washing soap works well for getting it off.

THUNDERBIRD
09-28-2005, 10:08 PM
great stuff isnt it u should read my thread bout how i got high of the fumes