PDA

View Full Version : where to get 6x8 to ??? bracets



bigexpo
09-26-2005, 11:00 PM
i have an expedition with the sucky 6x8/5x7 wutever speakers and speaker mounts in them. im looking for a circular replacment what size would fit and where would i get a mounting bracket for it, thanks.

smgreen20
09-26-2005, 11:14 PM
Nearest hardwhare store, and get 1/4" plywood. Make your own if you have the tools.

bigexpo
09-28-2005, 05:22 PM
cant i just buy one

Chevyaudio
09-28-2005, 05:25 PM
yeah try crutchfield. i thought i saw some over there at one time....but they are lible to be rather expensive for just scrap metal.

millerscents
09-28-2005, 06:26 PM
scosche has them
http://www.scosche.com/scosche_caraudio.aspx?CategoryID=48

they have a dealer locater on the same page (at top)

SSS 18734
09-28-2005, 06:45 PM
you could easily fit 6.5" speakers in the 6x8 spot, and 5.25" speakers in the 5x7 spot.

Try crutchfield for some adapter plates.

bigexpo
09-28-2005, 07:14 PM
so if they do work what speaker is a good canidate, i want it to be good but 100 bucks or under a pair?

bigexpo
09-28-2005, 07:21 PM
are these it......http://www.scosche.com/scosche_caraudio.aspx?CategoryID=48&ItemID=SA68

Blados
09-28-2005, 07:27 PM
are these it......http://www.scosche.com/scosche_caraudio.aspx?CategoryID=48&ItemID=SA68
yes

bri487
09-28-2005, 08:00 PM
i would just make them, like i did in my mustang. i actually had a 7" driver down there. had to do a little cutting though.

bigexpo
09-29-2005, 06:36 PM
im probobly gonna get a set of jl audio speakers, any sugg of which ones, i dont want to go over 120 bucks a peice

fatryan
09-29-2005, 06:47 PM
when i installed my MBQs i couldnt for the life of me find a 6x9 to 6.5 adapter plate, so i had to glass 1 up

Justintoxicated
09-29-2005, 09:03 PM
Buy a rotozip and make your own, + new tools = good.

bri487
09-29-2005, 11:11 PM
i would go with the pioneer tsd 170r (the rev series, yellow cones). those will smoke the JL coaxials. if you want something with a lot of midbass, i would go with the zapco iforce speakers. those will both be in your price range.

bigexpo
09-30-2005, 09:10 PM
well i need help on how to make teh brackets to house 6.5's
anyone have any expederience?

bri487
09-30-2005, 10:18 PM
well i need help on how to make teh brackets to house 6.5's
anyone have any expederience?

take your speaker and trace it and make sure to trace the inside of the holes too. then cut it out, and trace that one and then you have two of them. cut the hole in one of them for a 6.5" and then trace that on the other template, then you have two matching plates. i would use wood or something strong too by the way.

BassBEAST88
09-30-2005, 10:46 PM
ebay!