PDA

View Full Version : behringer ep1500



swc204
09-23-2005, 03:30 AM
Can it be ran at 7 ohms? if so how much power would it be puting out?

PV Audio
09-23-2005, 08:21 AM
if it can be run and 8 and 4, 7 won't be a problem. w7 3 ohm coil....no amps rate at 3 ohms but the w7 gets along just fine.

swc204
09-23-2005, 01:50 PM
if it can be run and 8 and 4, 7 won't be a problem. w7 3 ohm coil....no amps rate at 3 ohms but the w7 gets along just fine.

thanks......i just bought a 3.5 dvc sub. how much power would you think it would recieve?

JimJ
09-23-2005, 01:54 PM
I'd say around 900 watts...as an extremely rough estimate. Its 8 ohm rating is 800W, so you figure it's getting a little more than that.

swc204
09-23-2005, 01:59 PM
its perfect......thanks

swc204
09-24-2005, 05:44 AM
What kind of cable and plugs are needed to wire it? i also want to use these cables somehow
http://www.partsexpress.com/pe/pshowdetl.cfm?&DID=7&Partnumber=181-644&scqty=1


heres the owners manual
http://www.partsexpress.com/pdf/248-747m.pdf

i want it to be balanced
also what kind of cable would i need to go from the output to the banana plugs on the box?

JimJ
09-24-2005, 11:46 AM
You need some sort of a crossover for these things - because they don't have one built in.

And unless you have a balanced source, you can't use the XLR balanced inputs to their full advantage. Stick with RCA to 1/4" TRS adapters instead.

And you'll need 1/4" TRS to banana plug adapters, but PE as well as most pro audio shops stock those as well.

PV Audio
09-24-2005, 12:43 PM
dude, those dayton sub cables are the best value ever. anyone who tells you that monster cable or anyone else is better, shoot them. i have the 15 foot and it is cleaner than my monsterbass one.

swc204
09-24-2005, 03:28 PM
dude, those dayton sub cables are the best value ever. anyone who tells you that monster cable or anyone else is better, shoot them. i have the 15 foot and it is cleaner than my monsterbass one.

and its cheap. :D

swc204
09-24-2005, 03:37 PM
http://www.partsexpress.com/pe/showdetl.cfm?&DID=7&Partnumber=241-870

would this work?

http://www.partsexpress.com/pe/pshowdetl.cfm?&DID=7&Partnumber=092-320&scqty=2

is this a 1/4" TRS to RCA plug? it doesnt say its a RCA adapter...

swc204
09-24-2005, 11:17 PM
ttt

JimJ
09-24-2005, 11:36 PM
Parts Express sells adapters that are RCA on one side, 1/4" on the other...it plugs into a TRS jack and gives you an RCA jack instead. Then, you simply run your RCA cables like normal. For the speaker wires, something like the first link you posted is what you need.

swc204
09-25-2005, 12:29 AM
http://www.partsexpress.com/pe/showdetl.cfm?&DID=7&Partnumber=091-1010
found it.

thanks

JimJ
09-25-2005, 12:32 AM
Yup, those are the ones...I've got a coffee cup full of them here :)

swc204
09-25-2005, 12:57 AM
how was the cable?