PDA

View Full Version : box build help



lowgmc94
09-15-2005, 01:07 PM
hello i built a ton of boxes before.since i love this site and people actually know what they are talking about i need some opinions im building a box for my 1999 300m for two kicker comp 12's this years models. my box dimensions overall are 13*13*15l,w,h but i want a ported box i got 1.82 a side (inner dimensions) but the port is 2*12.5*16long factory specs. u can see the hieght of the port is a problem. any suggestions if i put it vertically ill have a step in the box on top if i put it horizontaly there no room for the sub just looking for suggestions thanks

ramos
09-15-2005, 01:31 PM
I don't come up with the same numbers as you got. I get a total volume of 1.46 cuft. So ? :)

lowgmc94
09-15-2005, 02:29 PM
your rite my bad i put a dif number in i put in 19 or 20 instead of 15

ramos
09-15-2005, 02:32 PM
That's gonna be a small enclosure :)

lowgmc94
09-16-2005, 06:58 AM
wow i must ahave been sleepin my dimensions are 38long 13high 15deep

ramos
09-16-2005, 09:24 AM
Now your talking 4.29 net. You got roughly 2 cuft per outer minues displacement. You also have roughly 19" per side length wise. So slap that there port in there length wise and you'll be straight :)

lowgmc94
09-16-2005, 10:03 AM
ya but i lose 2in and its a 12in speaker its only 13 high

ramos
09-16-2005, 10:23 AM
If those are inner dimensions how are you going to lose 2" ? maybe 1" if you have seperate chambers. and the 12" is the outer diameter. The cutout is at least 1/2" smaller. If your interior dimension is 13" tall the front panel will actually be 14 1/2" With 3/4 " 15" with 1". :)