PDA

View Full Version : Need help on my odd shaped box.



Trancer
09-07-2005, 12:57 AM
Hey guys.. decided to go with a different sound so I decided to see what the hype is all about the new Type R's. Anyway, since I want to port two Type R 12's with a small oddly shaped trunk, I created this oddly shapped box plan. I used a box creater, but I dont think its right.


I want to do a slot port tuned to 33 hrtz. I need to know how long to make the port with say.. a 4-4.5 inch port. The depth of the box can be adjusted. Can anyone help me with this odd box?

http://i20.photobucket.com/albums/b236/TrancerZX/boxplansfortypers.jpg

Trancer
09-07-2005, 02:11 PM
Anyone?

Trancer
09-07-2005, 11:07 PM
1.73278 cubic feet for the wedge style part and 4.85352 cubes for the box style part.

Psyence
09-08-2005, 12:03 AM
Actually the box part is 6.509

And we need the height of the other peice against the box part ;)

Trancer
09-08-2005, 12:17 AM
eeeek forgot about that...

And I added in the max of 16 inches... I actualy figured in a different number for the depth of the box.

16 inches high

Trancer
09-08-2005, 12:20 AM
Its fixed

Trancer
09-08-2005, 07:31 PM
Well hmmmm. Can anyone give me an idea to where I can find out my problem for myself?

Trancer
09-09-2005, 02:59 PM
Did some adding and my Net volume is 6.52... so if I want to tune it to 32 hrtz that would be 4 inches wide and 15.5 tall at 70 square inches of port?

Trancer
09-12-2005, 03:05 PM
Here is a better revised version of my box, Instead of the wedge box having a height of 16, I want to go with 15.5 and the cube box being a max of 16, but 14 would be nice

http://i20.photobucket.com/albums/b236/TrancerZX/boxplansfortypers1.jpg