What kinda wood to make a box

[spljim]

I have used 3/4in mdf on all the boxes i haf made and it works good but it is hevey what can i use that is as strong or stronger then mdf but haf the wight the box will be for 2 L7 so Fiberglass wont work it will take to long :D

[LBX2G]

nothing.....

[SSS 18734]

MDF is pretty light... only thing I can think of is going with thinner wood but I wouldnt recommend it.

[PowerNaudio]

you can build them out of fiber glass, is lighter and if built right stronger then mdf.

[creater]

HDF may be stronger...but i dont think that would be anywhere lighter

[SSS 18734]

you can build them out of fiber glass, is lighter and if built right stronger then mdf.

yes be he says he doesnt want to deal with fiberglass.

[PowerNaudio]

yes be he says he doesnt want to deal with fiberglass.

he did, humm, you can use 1/2" mdf and brace it well, and it should give you the strength you need, but it will only be slightly lighter.
what size are the L7s?

[spljim]

my box will be 32wide 29long and 13high so fiberglass this mutch will not onely be a pain in the *** but coust a lot on the Powered4Soundforum they sed they redid there boxes with mdf light what is this I have the 04 12in models

[creater]

***punctuation is needed mang***

and just curious...but why do u need it to be lighter?

[DBfan187]

birch ply is lighter and stronger.

[spljim]

with all the caraudio stuf in the back of my car waing in at over 150lbs and i still wont to mack the box biger i thought if i can mack it liter it will be beter