PDA

View Full Version : Help me design (.3 megs worth of pics)



Justin89T
08-28-2005, 02:03 AM
I have two MTX amps, 5601 and 5604. I'm going to get an RE SE 12 for the 5601
I have the experience to make pretty much anything I want, but I really **** at designing stuff... no creativity.


Anyway, this is my trunk (88 supra pictured, I've an 89) and pictures of the products. If anyone has a bright idea and a few minutes to photochop it post it up!

I was thinking of throwing in a plexi "SUPRA" logo in there somewhere to take up some extra space.


also, if you notice the four 'hooks' in the hatch space? those support the targa top, so the design has to take into account that the top is going to be in there....

http://home.comcast.net/~bouscal/Sub.jpg
http://home.comcast.net/~bouscal/5601.gif
http://home.comcast.net/~bouscal/both.gif
http://home.comcast.net/~bouscal/trunk1.jpg
http://home.comcast.net/~bouscal/trunk2.jpg


if this is the wrong place, just move it! Thanks :)

Dosh142
08-29-2005, 11:49 AM
Can you fiberglass it or are you looking to build it out of mdf?

davidfre21
08-29-2005, 12:00 PM
only thing i can think of is the amps on the sides and sub in the back, and glass around everything

or u could try porting and run the port under where the targa would sit

that targa limits space

Justin89T
08-29-2005, 12:12 PM
Can you fiberglass it or are you looking to build it out of mdf?


I can fiberglass.


my thought was the two amps up top, at about a 45 degree angle, raised slightly (facing the rear) the sub where the spare tire is (lower left) and SUPRA carved outta plexi with a red neon under it