PDA

View Full Version : what products should I use?



Colin P
08-23-2005, 05:47 AM
Hi
I'm going to hack my dorrcards up (basically cut the grilles out) and then mout the mids in a custom mount so the stick out a bit and at a slight angle, anyway, i'm going to make the structure out of mdf and screw that to the door I guess and then use mesh around the structure but what product would you guys use to stick to the stock plastic doorcards that would also fill the stricture? Shuld I use a body filler, fibreglass filler, liquid plastic or....?

any tips or advice would be useful, I have spare doorcards so if I mess up it doesnt matter!

dbornotdb
08-23-2005, 09:40 AM
Clean and prep your panels real good and use Liquid Plastic if you have it around you.

Colin P
08-24-2005, 02:16 AM
i dont but i'm sure I can find somewhere on the net that I can buy it from

dbornotdb
08-24-2005, 01:32 PM
http://hzemall.com/catalog/product_info.php?products_id=31&osCsid=8c2c65302d65c75e84fc9c589cd2cbfe

davidfre21
08-24-2005, 01:34 PM
cool he is from the UK