PDA

View Full Version : Liters to cub ft./vice versa help



Cajundude
08-18-2005, 11:30 AM
Since this is my first fiberglass build ever and I hate math, I would apprecicate a little help here.

Box is sealed, all glass. I have managed to squeeze out a little over what's called for in the limited area I have to work with so here are the #s:

Box space = 22 liters (I used water to measure it)
10W6v2 calls for 17.7 liters of space
The sub itself actually takes up 1.9 liters of space (according to JL)

So I figure I'm about .07 cubic foot over. Does this sound correct?

Johnny Drama
08-18-2005, 11:32 AM
Go to google and type in metric conversions.

djman37
08-18-2005, 11:38 AM
here's one of the calcs I found http://www.1728.com/convvol.htm

here's another http://www.onlineconversion.com/volume.htm

squeak9798
08-18-2005, 11:54 AM
My personal favorite: http://digitaldutch.com/unitconverter/

Cajundude
08-18-2005, 12:01 PM
Thanks guys! Found one on google that works great. I'm .08 over. Should I add wood or would that little bit be ok?

UndercoverPunk
08-18-2005, 12:10 PM
you could brace it, glass a little more on the inside, not care cause .08 won't make a difference that you're going to notice, there's a plethora of options.




PLETHORA

Cajundude
08-18-2005, 07:10 PM
Thanks for all the responses! I'll leave it as is. It is pretty solid. Fillin' in the outside now. Wish I had a dual action air sander...:crap: Comin' out good so far.