PDA

View Full Version : Tweeters??



iceteebone
08-13-2005, 03:22 PM
looking for a set of about 1" tweets. got any recomendations? i have about 75 watts rms to put to them. i want cheap ones, but not cheap ones lol. like a good quality tweeter that's cheap. i don't know much about tweets as you can tell, so i don't even know what brands to look at. i really liked the cdt tw-25 tweets, but new ones are like $70.

iceteebone
08-13-2005, 03:39 PM
is this one any good? http://www.partsexpress.com/pe/showdetl.cfm?&DID=7&Partnumber=264-578 and is that also a 4 ohm nominal tweet?

Starky
08-13-2005, 04:31 PM
140 RMS? Christ those most get loud.....intriguing....

audiolife
08-13-2005, 04:40 PM
is this one any good? http://www.partsexpress.com/pe/showdetl.cfm?&DID=7&Partnumber=264-578 and is that also a 4 ohm nominal tweet?
4 ohm nom yup

iceteebone
08-14-2005, 08:29 PM
anymore suggestions?

RCwhat
08-15-2005, 12:44 AM
lpg 25nfa are sweet tweets for the money: http://www.madisound.com/cgi-bin/index.cgi?cart_id=7129846.25103&pid=635

the seas lotus reference are much sweeter if you got the cash, (these are my next set of tweets along with the mids):http://www.mobilesq.com/products/get_product.php?id=2

audiolife
08-15-2005, 01:48 AM
http://www.partsexpress.com/pe/showdetl.cfm?&DID=7&Partnumber=264-555 if you like ******* lol

Bake
08-15-2005, 03:42 PM
zeb has the CDT imaging tweets on sale for $60.00. Silk and Titanium. Could you use those? Also some Pioneer and Kenwood for under 50 bones.

bri487
08-15-2005, 03:45 PM
cdt's or diamonds.

Ignatowski
08-15-2005, 05:02 PM
lpg 25nfa are sweet tweets for the money: http://www.madisound.com/cgi-bin/index.cgi?cart_id=7129846.25103&pid=635

the seas lotus reference are much sweeter if you got the cash, (these are my next set of tweets along with the mids):http://www.mobilesq.com/products/get_product.php?id=2


x2 on the lpg's

iceteebone
08-16-2005, 12:12 AM
what about a set of image dynamics nx30 tweets?

audiolife
08-16-2005, 01:19 AM
either lovem or hatem i spose lol

iceteebone
08-16-2005, 04:59 PM
i have narrowed it down to the ID tweets or these vifa tweets: http://www.madisound.com/cgi-bin/index.cgi?cart_id=7129846.25103&pid=1365

which ones should i go with?

audiolife
08-16-2005, 05:07 PM
the image tweets are a big dispersion type which i love but the vifa speakers are nice to but on an installation stand point i think the images would be more like u are used too.

iceteebone
08-16-2005, 05:09 PM
the image tweets are a big dispersion type which i love but the vifa speakers are nice to but on an installation stand point i think the images would be more like u are used too.


i'm utterly confused now, lol.

audiolife
08-16-2005, 05:12 PM
neither one would be "bad". install wise id go with the id it would/should be more forgiving on mounting locations

iceteebone
08-16-2005, 05:20 PM
neither one would be "bad". install wise id go with the id it would/should be more forgiving on mounting locations


here is a pic of where the tweeter will be mounted.

http://img235.imageshack.us/img235/8525/62832519full3cf.jpg

if my measuring is accurate, the vifa tweet should just drop in.

audiolife
08-16-2005, 05:43 PM
then go for it mr picky lol

iceteebone
08-16-2005, 05:48 PM
then go for it mr picky lol


the only reason i'm leaning towards the vifa tweets is because they are new vs. the ID tweets which would be used.

audiolife
08-16-2005, 06:23 PM
make up your mind man!! lol (just razzin ya) id go with a warranty too