View Full Version : HU fuses keep blowin' out??????????Help???????
07-27-2005, 11:59 AM
My fuses on my pioneer head unit keeps blowing everytime I try to connect the harness to it. It first blew out when I was connecting my amp. Could someone please tell me why it keeps blowing out.Help me please!!!!!!!!!!!!!!!!!!!
07-27-2005, 12:18 PM
disco-****in-nnect the cables from the battery before doing that... how many times do i have to say that!?!?!?!
oh, and check if there's no short on the wires lol
07-27-2005, 01:11 PM
thanks for the advice, I'll try that to see if that's the problem.
07-27-2005, 01:42 PM
try a bigger fuse
07-27-2005, 01:54 PM
try a bigger fuse
I have to disagree with you...
07-27-2005, 05:11 PM
True, i was thinking something else. ;)
07-27-2005, 05:44 PM
See if you accidentally connected the HU ground to a power or illumination wire.
07-27-2005, 08:26 PM
I tried disconnecting the cables and that didn't work what else could it be???
07-27-2005, 08:54 PM
You have made a mistake in the wiring, you will need to rewire your connections and wake sure every wire is connected to the correct one.
07-27-2005, 09:19 PM
I did that and everything is connected correctly to my knowledge. I didn't see anything wrong with the wiring but I rewired everything just to make sure and my fuse still blows. What else could it be??????????
07-27-2005, 09:28 PM
well use only the yellow and the red wires to a 12v+ source and the black to a ground or to the negative of the battery... ignore illumination and all the rest if theres anything else... isolate em so it doesn't touch any ground...
if it still blows i think you might have a short inside your head unit or somewhere...
make sure you're not getting a short on the speaker wires too or if the RCA isnt touching a metal part of the car, ive seen similiar problems caused by this too
if it still blows you will have to take a look at the hu, thats very unusual for a head unit
edit: may be also good if you could wire another head unit to your car and see if this one's fuse blow
07-27-2005, 09:59 PM
What kind of car is it?
Some older GM vehicles actually use a dark brown/black for illumination. I really think that that may be your problem.