Fiberglass question

[netherland24]

if i was gona make an fiberglass box for 2 12's R type's last year models could i port it? or does it have to be sealed? cause i want bang.

[fo0manchu]

you can port it.

[iamamp3pimp]

you just need to use smething pretty exact to get port length and size though

[Woodmister]

Yea, porting a fiberglass box, while possible is very hard

You have to have the cubic feet down to the .05 at the most since a port relies on such an exact box size.

Im working on a sealed box right now, almost done, let me know if i can help...

[flakko]

make the box, and fiberglass over it!! so it "LOOKS" like a fiberglass enclosure

you can also use water to measure the volume.

[req]

just make a desired box\port size on paper. then shoot for a larger box than your paper\pencil enclosure.

backfill it with closed-cell foam blocks until the box volume (after displacements) is equal to your paper\pencil calculations.

its not too hard :p:

[Woodmister]

Of course its not impossible and "that hard" but it is harder then just sealing the thing since you can be off and not make a big difference. But with some time and patience you can do it :)

[DOHCrazy]

If you need any help since your local, let me know. Ive already made alot of stupid fiberglass mistakes to learn from.

[ruckus]

Im making a ported fiberglass enclosure right now actually.

http://dillusionz.com/gallery/fiberglassbox

the center flat piece will hold 2 4" aeroports I already glassed it6 just havent taken pics yet. need to bondo and sand

[djman37]

what car you puttin' this in??