PDA

View Full Version : installing mids in doors... check and see if i'm doing this right



iceteebone
07-26-2005, 11:28 PM
first lets start off by showing a pic of what my door panel looks like:
http://img179.imageshack.us/img179/2323/62832519full8fp.jpg

what i'm gonna do is make a fiberglass pod that will fit over that large hole and mount my 6.5 where the magnet will go through that hole. i'm gonna block the holes in the outer doorskin with plexiglass, and deaden the hole door with 2 layers of mat. then behind the cone i will use a deflex pad, or egg carton foam behind the speaker. i will fiberglass the back of the door panel behind where my 6.5 will mount for reinforcement, and deaden the whole doorpanel. does this sound good? am i missing some steps?

MrSwiss
07-26-2005, 11:40 PM
hey man u said u live near the flint area right? keep us posted and take pics

Starky
07-26-2005, 11:42 PM
jeez All these michiganders around these parts....

iceteebone
07-26-2005, 11:58 PM
hey man u said u live near the flint area right? keep us posted and take pics


about 120 miles straight up 75 from flint. do you know where houghton lake is?