PDA

View Full Version : Check Out My Box Plans



tmaggert
08-08-2002, 10:14 PM
This is a custom box I designed today for my '89 Jeep Cherokee. I found the angle of the seat for the back and this should stick out 4" from the top of the seat and go all the way across the trunk. I will use 3/4" MDF. Can some check this please. I just remembered I forgot to check the depth of the woofer in the box! ****! I'll post my improvements if It doesn't fit. Each chamber has a volume of 1.136ft3


http://sopris.net/~taylor/Ebay/FinalBox.jpg
http://sopris.net/~taylor/Ebay/FinalBoxFront.jpg


Here is a PDF:
http://sopris.net/~taylor/Ebay/Box.pdf

tmaggert
08-08-2002, 10:29 PM
I f***ed up! The sub doesn't fit!! I'll have to fix this later!

tmaggert
08-09-2002, 02:10 AM
Here is the correct box!!!!!

http://sopris.net/~taylor/Box/Box.jpg
http://sopris.net/~taylor/Box/BoxFront.jpg
http://sopris.net/~taylor/Box/BoxSide.jpg


And the PDF:
http://sopris.net/~taylor/Box/Box.pdf

mr4pto
08-09-2002, 09:53 AM
Don't you just hate it when the **** thing doesn't fit. God that would **** if you built a box and the subs wouldn't fit heh. Good thing you checked on that. What kind of subs are you using... also remember the hole wont be exactly 12" else your sub will fall in the box heh....

tmaggert
08-09-2002, 10:48 AM
I'm using 2 JL 12w3. Powered by a Kicker KX800.4. I know not to cut it 12" that was just easier to put down. I need to cut the holes like 11.0625"

The only problem is I can't build this box till after christmas:(

mr4pto
08-09-2002, 12:21 PM
Hmm why thats like months from now..... and why are you powering 2 subs with a 4 channel amp?

tmaggert
08-09-2002, 12:47 PM
I got the amp cheep!!!!!! I'm going to bridge it at 400x2 at 4 ohms. I'm going to borrow a box from my friend till I build the box. I can't build the box till christmas because I'm still in high school and football takes all my time till thanksgiving and then I have work. My school had a wood shop so I can use that to build my box after christmas.

mr4pto
08-09-2002, 02:47 PM
I like kicker amps alot. I have heard a few of them that have impressed me. Anyways do they make a W3 that can be wired to 4 ohms anyways? That might be a lot of power to a W3... 400 watts from the kicker amp that is

banging chevy
09-21-2004, 11:25 PM
:needpics:
This is a custom box I designed today for my '89 Jeep Cherokee. I found the angle of the seat for the back and this should stick out 4" from the top of the seat and go all the way across the trunk. I will use 3/4" MDF. Can some check this please. I just remembered I forgot to check the depth of the woofer in the box! ****! I'll post my improvements if It doesn't fit. Each chamber has a volume of 1.136ft3


http://sopris.net/~taylor/Ebay/FinalBox.jpg
http://sopris.net/~taylor/Ebay/FinalBoxFront.jpg


Here is a PDF:
http://sopris.net/~taylor/Ebay/Box.pdf

tmaggert
09-21-2004, 11:28 PM
This thread is 2 years old. I no longer have the picts!

DBfan187
09-22-2004, 12:12 AM
This thread is 2 years old. I no longer have the picts!
hahahahahhahahahahahaha

Did you get an email about this? You probally haven't been here in 2 years either?!?!?!?!?!?! HAHAHAHAHAHAHAHAHAHHA