PDA

View Full Version : work for a client, glass, subs, components, pics!



req
07-14-2005, 11:39 PM
so he has a 2000 (or so) toyota camry. he just scooped a deck from CC that i swapped in there (iso mount + metra smart harness = teh own) in about 10 minutes. took longer to get the cage off and everything out of the plastic than to actually swap the radios

so then i put two sets of 5.25 next components in the front doors (i hate the toyota doors, because they use these gay white clips that break eaisly, and the stock speaker has some weird triangular basket, so regular 5.25's wont fit

then i put the mids from another set (with crossovers) in the rear deck - and the rear deck is also a *****, why cant they bolt the speakers from UNDERNEATH instead of dropins+screws... and i got a nice little 4 channel AudioArt oldschool gainblock (prolly like 25x4@4 or so) for him. it shwill pump up the volume a bit.

and today we made some glassed boxes for his trunk, corner boxes - looking mighty ****, but since it rained, the humidity is making it take forever for them to dry - if its nice tomrrow and they arent solid, ill put them in the sun for a little bit.

i ordered a profileAP1000 for him. he is getting a pair of NEXT 10's - prolly like 160x2@4.

here ar esome pics, it should be fairly **** when its all said and done. and im making custom tweet sail mounts for him when my plastic filler comes in the mail.

pics:

(the next amp thats in the pics is mine, just there for show, and the audioart amp isnt hooked up yet, just HU power for now, awaiting a good amp kit if i can find one)

http://img311.imageshack.us/img311/1707/19yc.th.jpg (http://img311.imageshack.us/my.php?image=19yc.jpg)http://img305.imageshack.us/img305/3572/27sc.th.jpg (http://img305.imageshack.us/my.php?image=27sc.jpg)http://img305.imageshack.us/img305/4185/51pw.th.jpg (http://img305.imageshack.us/my.php?image=51pw.jpg)http://img305.imageshack.us/img305/8959/60yx.th.jpg (http://img305.imageshack.us/my.php?image=60yx.jpg)\http://img305.imageshack.us/img305/4043/86kd.th.jpg (http://img305.imageshack.us/my.php?image=86kd.jpg)http://img305.imageshack.us/img305/3748/90im.th.jpg (http://img305.imageshack.us/my.php?image=90im.jpg)http://img305.imageshack.us/img305/5672/109br.th.jpg (http://img305.imageshack.us/my.php?image=109br.jpg)http://img305.imageshack.us/img305/9808/121rs.th.jpg (http://img305.imageshack.us/my.php?image=121rs.jpg)http://img305.imageshack.us/img305/2737/130rf.th.jpg (http://img305.imageshack.us/my.php?image=130rf.jpg)
continued

req
07-14-2005, 11:39 PM
http://img305.imageshack.us/img305/3161/144gd.th.jpg (http://img305.imageshack.us/my.php?image=144gd.jpg)http://img305.imageshack.us/img305/8803/159eo.th.jpg (http://img305.imageshack.us/my.php?image=159eo.jpg)http://img305.imageshack.us/img305/7610/165mm.th.jpg (http://img305.imageshack.us/my.php?image=165mm.jpg)http://img305.imageshack.us/img305/9279/178ay.th.jpg (http://img305.imageshack.us/my.php?image=178ay.jpg)http://img305.imageshack.us/img305/4034/181lp.th.jpg (http://img305.imageshack.us/my.php?image=181lp.jpg)http://img305.imageshack.us/img305/417/196mn.th.jpg (http://img305.imageshack.us/my.php?image=196mn.jpg)

the boxes are drying, and in the next few days, hopefully we can wire up the AP1000 and give them a testrun :)

i gotta do some measuring to see if they are close to the same volume and see if one needs some backfill. im looking for ~1 cube for each side :)

AznRevlAzn
07-14-2005, 11:41 PM
oh man req awesome work

davidfre21
07-14-2005, 11:43 PM
i thought it was bad to mount an amp upside down, why not do the floating trick?

GCAdidas13
07-14-2005, 11:44 PM
yay.

august12.

req
07-14-2005, 11:45 PM
i thought it was bad to mount an amp upside down, why not do the floating trick?

its not a real heat machiene, it wont be putting out hundreds of watts, and its a straight gainblock. with an amp that small, and a heatsink that large, i doubt there will be any issues.

and BTW, this was all 3 days of work so far :)

the components took by far the most work... such a PITA to do :p:

ngsm13
07-15-2005, 12:23 AM
Ummmm....I'm tellin CC ;)

Remember the "e-learning", it's a "conflict of interest" ;)

NG

req
07-15-2005, 12:23 AM
oh yea. but this was set up before i got the job at CC :)

and they wouldnt do FG anyhow!!!

lol. SHHHHHH ng!!!!

ntense702
07-15-2005, 12:34 AM
good stuff as usual req

slicks5150
07-15-2005, 12:43 AM
yeah it's looking good , cant wait to see how it comes out.

req
07-15-2005, 01:09 AM
me too, should be done by the end of next week if the plastic filler comes in the mail :D

supa_c
07-15-2005, 01:12 AM
right xover is crooked.
Those NEXT subs are emo, it says so on the cone

req
07-15-2005, 09:59 AM
right xover is crooked.
Those NEXT subs are emo, it says so on the cone

yea i know :)


audioEMOtions. :crying:

Chevyaudio
07-15-2005, 11:46 AM
looks good man.

Shyne151
07-15-2005, 01:01 PM
Ummmm....I'm tellin CC ;)

Remember the "e-learning", it's a "conflict of interest" ;)

NG

Haha I was thinking the same thing... so many people come in that I could make easy money off of but I don't :(

ngsm13
07-15-2005, 01:13 PM
Haha I was thinking the same thing... so many people come in that I could make easy money off of but I don't :(

Oh god, same here...I could make a killing.

NG

ruckus
07-15-2005, 01:57 PM
someone besides me actually using the next comps and amps :D

req
07-15-2005, 04:32 PM
yep yep :)

not too much midbass, but for $35 - daym :D

and $90 for 160x2@4 amp, you cant beat that.

too bad its all sold now :p:

2kchevy06civic
07-15-2005, 04:39 PM
nice work req




can't wait to get started on my project *cough* :up2somet:

kuijo
07-15-2005, 04:52 PM
Looks like you do some good work, req

req
07-17-2005, 11:52 AM
thanks everyone.

i got them resined, need a few layers of matte i think.

dbornotdb
07-18-2005, 12:00 PM
:2thumbs:

req
07-18-2005, 12:38 PM
lol thanks born. the kid is on vacation right now. i think im gonna go out and put a few layers of glass down, they seem a little flimsy with just the fleece :)

AVSTANG02
07-18-2005, 04:07 PM
more of req's half finished work.

req
07-19-2005, 11:54 PM
more of req's half finished work.

dont be a jew. the mounting of the components is done

just gotta wait for the kid to get back from vacation to finsih it up :p:

slicks5150
07-20-2005, 01:10 AM
Looks like you do some good work, req
kuijo, nice sig. I like that. :veryhapp:

req
03-14-2007, 01:28 AM
****. i never posted finished pics for this i dont think?

here we go :)

http://img213.imageshack.us/img213/6619/72473628gj4.jpg
http://img83.imageshack.us/img83/5928/img0268wr1.jpg
http://img83.imageshack.us/img83/2337/img0261tr5.jpg
http://img213.imageshack.us/img213/3741/img0269qp8.jpg
http://img85.imageshack.us/img85/7553/img0238nb8.jpg
http://img85.imageshack.us/img85/340/img0267qq2.jpg
http://img213.imageshack.us/img213/135/img0264mb0.jpg


thats about it. comps up front, comps in rear, running off that little audioartNSX amp. and that sucker makes some serious power. i was freggin floored about how loud those comps got off that little amp. like 9"x9"

tweeter pods were done with HzEmAll's plastic filler, and SEM texture spray. i never got to paint them with the SEM black coat because he had to leave for college the next day. but they still looked great with just the black texture coat on them they look a lot less 'matte' in regular sunlight.

and the next 10's are getting like 200w each or so (amp is the 2ohm mono 400w profile)

and the volume of the enclosures was way too big, so i backfilled them with some closed-cell foam i had in the basement :)

it was a long time ago. but hooray. :D

troy_audi0
03-14-2007, 03:05 AM
I like the Box's very clean..
I like your work..
here is a link to my work log..
>>LINK TO WORK LOG<< (http://www.audioartsandelectronics.com/shoptalk/viewtopic.8675.html)
Hope you like my work too..
Peace Troy

req
03-14-2007, 01:35 PM
looking good my friend :)

you have a few more clients than i do lol, i only did a few up class installs in my time. mostly just amp and sub kinda stuff for people that knew me :)

i might steal this idea from you :)

http://memimage.cardomain.net/member_images/2/web/2558000-2558999/2558854_54_full.jpg
http://memimage.cardomain.net/member_images/2/web/2558000-2558999/2558854_55_full.jpg

:D