PDA

View Full Version : Wiring Confusion



Mr. Opportunist
07-11-2005, 02:05 PM
I am very confused b/c i went over the wiring and it doesnt look right, i did it the same way that the shop did it, is this a 4 ohm or 2 ohm load?
http://www.custel.net/4ohm.jpg i have 2 subs both are wired separate from eachother going to the same amp just like that.
http://www.custel.net/2ohm.jpg that is how they are suppose to be.

Is the first image add another speaker with separate wire and wired the same way are they running at 2ohms or 4ohms? They are each wired like that to a terminal cup then from the 2 terminal cups they are run to the + and - holes in my mrd-m1005 like this(sorry for horrible ps pic.)
http://www.custel.net/wiring.jpg

squeak9798
07-11-2005, 02:11 PM
If you wired each sub individually in series, then paralleld them together at the amp the load is 2ohm.

Mr. Opportunist
07-11-2005, 02:13 PM
i updated the last pic to how it is