PDA

View Full Version : Angled straight port



tyroneshoes
07-09-2005, 10:06 PM
My box need a 14x3 inch port. I dont have the 14 + 3 inch of clearance depth in my box. Is it ok to run the port in the box in an angle like horizoantaly or is it better to use a 45 degree l connector? Its for an IDQ 12. I dont have flared ends but port noise probably wont be noticable since its in the trunk of a sedan. Or will it? I dont know this is my first ported box

ruckus
07-09-2005, 10:55 PM
like stated in the post a few down from your with the same exact question use a pvc elbow and flare the ends cause you will have port noise.

PhatTonyDeMarco
07-09-2005, 10:58 PM
Oxymoronic title, anyone?

tyroneshoes
07-09-2005, 11:07 PM
i dont have flared ports and Im building it tomarrow. Im asking which is the better solution

bigred78797
07-09-2005, 11:16 PM
eh just curve it... round the edges... and call it a day since you don't wanna do what ruckus said.

tyroneshoes
07-09-2005, 11:20 PM
so would a 45 degree elbow give less port noise than a 90? and what does port noise sound like? Never went ported before.

Black_Jesus
07-10-2005, 01:23 AM
so would a 45 degree elbow give less port noise than a 90? and what does port noise sound like? Never went ported before.a very airy farting sound. chuffing is a word some people use to describe it also

ruckus
07-10-2005, 10:14 PM
I think it sounds more like a queef :D and a 90degree angle isnt gonna cause more noticable port noise than a 45 degree because the elbows are rounded angles. The noise is mainly coming from non rounded ends and hard corners.

ajbrickyard
06-27-2007, 05:32 PM
My box need a 14x3 inch port. I dont have the 14 + 3 inch of clearance depth in my box. Is it ok to run the port in the box in an angle like horizoantaly or is it better to use a 45 degree l connector? Its for an IDQ 12. I dont have flared ends but port noise probably wont be noticable since its in the trunk of a sedan. Or will it? I dont know this is my first ported box
Hey tyroneshoes, How did the box turnout? was there any port noise and how is the 12 hittin in that box? I have a IDQ12 in a sealed box(sounds good) in my trunk and I'm about to have the ID spec ported(more output) @30hz. box built. I see by your port lenth you have yours tuned to 30hz also.

Rawr-DQ
06-27-2007, 05:48 PM
07-09-2005, 10:06 PM

Nice one

ajbrickyard
06-27-2007, 06:55 PM
07-09-2005, 10:06 PM

Nice one
Yea it is a nice one! I want to know what it sounds like or sounded like. Whats the point of your post? you've been on here since 04 and still post. Why can't he still be here to answer my question?

skmfkr
06-27-2007, 07:01 PM
lol i saw phattony up there and was like i havnt seen him in awhile and then i saw the date

Rawr-DQ
06-28-2007, 07:21 AM
Yea it is a nice one! I want to know what it sounds like or sounded like. Whats the point of your post? you've been on here since 04 and still post. Why can't he still be here to answer my question?

YOU CAN PM THE ****ING GUY INSTEAD OF BUMPING A 2 YEAR OLD POST!!!!

ajbrickyard
06-28-2007, 05:09 PM
YOU CAN PM THE ****ING GUY INSTEAD OF BUMPING A 2 YEAR OLD POST!!!!
WHAT'S IT THE F*** TO YOU ANYWAY!!!!

hoss
06-28-2007, 05:16 PM
YOU CAN PM THE ****ING GUY INSTEAD OF BUMPING A 2 YEAR OLD POST!!!!

:rolleyes:

hes got like a week and a half before its two years old...

i had to click just to see what exactly an "angled straight" anything looked like :wow: . then i forgot to read the thread, oh well.