PDA

View Full Version : Blow-thru enclosure



Einzee
07-01-2005, 03:17 PM
A friend wants to get all of his equipment out of his std cab stepside and put it in the bed. Conventional blow-thru methods involved cutting the entire piece of metal out from under the back window and the front of the bed. This is not an option for him. I am in the process of designing an enclosure that would only require minimal cutting of his truck. Im currently considering a Fourth order three chamber single reflex bandpass enclosure. Pic is below. The port(s) will be the only thing that will protrude into the cab.

Is this a good choice or is there a better one I should look at?

His equipment : RF 20001 bd and a pair of RF 12's (forgot the model #) approx 1000W RMS each.

Rattlebrain
07-01-2005, 03:22 PM
What picture?

Mikey Likes It
07-01-2005, 03:23 PM
really, be careful that ish dont get robbed. otherwise, sounds cool

Einzee
07-03-2005, 03:37 PM
this is the pic (http://www.caraudio.com/vb/showthread.php?t=105181)