PDA

View Full Version : 01 Expedition eddie bouer , questions. HELP.



valant_94gt
06-26-2005, 05:26 AM
01 Expedition eb, with Mach stereo system.

What are the speaker sizes. Crutchfield doesn't help me much.

I think it's 6 speakers plus a 8" woofer..

don't know the sizes though.



Also I want to install my pioneer hu, but not sure how to get the stock cd changer, and dvd pla to work. I belive the DVD works in a fm tuner. but not sure about how the cd-changer works..

millerscents
06-26-2005, 11:59 AM
hope this might help some
http://www.scosche.com/applications.aspx

metra was no help they had no info sorry i couldn't help more

Expy2000
06-26-2005, 12:00 PM
<-- Has an EXPY too

6x8 in the doors is the size for factory crap..

Take those factory POS out first thing, thrown in some 6.5 comps.. IMO


I can't help ya on the CD changer since I replaced mine with an aftermarket one..

Far as you DVD.. What model HU are you going with?

.. oh ya take the crappy papercone woofer out too, install something else.. IMO


:)

valant_94gt
06-26-2005, 12:28 PM
<-- Has an EXPY too

6x8 in the doors is the size for factory crap..

Take those factory POS out first thing, thrown in some 6.5 comps.. IMO


I can't help ya on the CD changer since I replaced mine with an aftermarket one..

Far as you DVD.. What model HU are you going with?

.. oh ya take the crappy papercone woofer out too, install something else.. IMO


:)

1. 6.5 will fit in all locations ?

2. Actually it has a VHC, I will be installing a DVD.

3. Pioneer hu, I forget the model, has the el display and 3 preouts.

4. I was thinking the same thing, I have a re8, I would probably have to wire it to 8ohms. I don't think the stock amp will like a 2ohm load. Or would it ?

valant_94gt
07-02-2005, 02:14 AM
How in the hell does the sub come out ? I took off the grill and took out all the "wrench" screws. But it will not come out.

Also what ohms can the factory amp receive saftly ?

I want to install some re 6.5's I just wish I know power & ohm ratings for the factory audio.

supa_c
07-02-2005, 04:49 AM
Get a phatty slot tipped screw driver and pry that sucker loose. Who cares if you break it, not like its worth anything
I wouldnt run any factory stuff under 4ohms
Factory radio should be around 15 or so watts per channel if it has no external amp.

valant_94gt
07-02-2005, 12:59 PM
It's the premium Mach system, I belive it's all amped.

And This **** subwoofer (I found) Has a screw that holds it in from the back.