PDA

View Full Version : Fiberglassed Mold Question



DP&MD11
06-21-2005, 11:21 PM
I got my mold popped and trimmed and everything is good. I forgot to lay my carpet down when i glassed the mold. I could lay carpet down but the mold wont fit. I could start over but that is money i dont have. I think that im going to cut out the carpet where it is needed that is fine, no problem. But when the sub hits and the glass rubs directly against the metal flooring i dunno what will happen. I thought i could put a thin but effective coat of liquid deadener on it and this would solve my problem. While on the subject of this can u spray or paint the deadener inside/outside the fiberglass enclosure? Thanks for advice on my lil jam here.

DP&MD11
06-22-2005, 03:50 PM
so does any1 think that the liquid sound deadener would work in my case?

BeanII
06-22-2005, 06:44 PM
i doubt you'll notice if the fiberglass is rigid enough

BeanII
06-22-2005, 06:44 PM
but a coat of a liquid sound deadener isn't a bad idea

DP&MD11
06-22-2005, 06:50 PM
So if i threw down a coast of liquid deadener it wouldnt mess up the orginal molding at all?

BeanII
06-22-2005, 06:52 PM
I can't answer that. I can't see what you've done. Is it the tire well in the trunk? If so you probably will be fine. If you're that worried, through a layer of liquid deadener inside the enclosure.

DP&MD11
06-22-2005, 07:56 PM
This what the mold looks like.

http://img93.echo.cx/my.php?image=fiberglassing0054hn.jpg

http://img93.echo.cx/my.php?image=fiberglassing0073ms.jpg

Decipha
06-22-2005, 08:07 PM
why would you throw deadner inside the box? ...doesn't make sense to me

maybe polyfill but deadner... thats a first in my books


BTW: your molding looks like shiit

DP&MD11
06-22-2005, 08:36 PM
i trimmed it up a bit so it looks alot cleaner.

BeanII
06-22-2005, 11:37 PM
What exactly is it you're worried about? It looks like that takes up quite a bit of space. With the weight of the box, you shouldn't have any problems.

DP&MD11
06-22-2005, 11:46 PM
nevermind im tossing the whole thing and starting over. Thanks for the info though about the deadener tho.