PDA

View Full Version : 6-12-05 Oswego event result



SPL140.2
06-12-2005, 07:58 PM
The best thing of the show was that the "last don" broke 150db today :D Congrats to you don, you finally did it :D

I did a modest 143.6db but good for 1st :D
TD struck again;)

Johnny Drama
06-12-2005, 08:07 PM
The best thing of the show was that the "last don" broke 150db today :D Congrats to you don, you finally did it :D

I did a modest 143.6db but good for 1st :D
TD struck again;)



Meter location, doors and windows up or down?

netherland24
06-12-2005, 08:07 PM
do u deadner anywhere on ur car?

SPL140.2
06-12-2005, 08:08 PM
Meter location, doors and windows up or down?
windshield, windows up.

SPL140.2
06-12-2005, 08:09 PM
do u deadner anywhere on ur car?
deadner on trunk lid and rear deck.

Johnny Drama
06-12-2005, 08:13 PM
windshield, windows up.


Good scores :) congrats!!

SPL140.2
06-12-2005, 08:19 PM
Thank you ;) I think my daughter damaged my subs the other day :crap:

req
06-12-2005, 08:34 PM
eggy. i know you have a digital camrea. where are the EFFING pictures!!!!

now do that aluminum tape thing!!!

SPL140.2
06-12-2005, 10:50 PM
Sorry Andy,
I didnt take pics at this event cause it had the same people their that I already took pics of. I only took pics of my score. If you want I could post them up. Get your **** saturn done the big prize money show is coming up fast :) BTW, I messed with my subs like an hour ago, and there is something wrong with 1 of them, still works but it doesnt if you know what I mean. So I took them out and put my other SPLML12 subs in and burped out a tone, and :wowflash: it was louder!!! I couldnt believe the subs handled the orion 2500D!! Their only rated for 600wrms. So ill be using those for the show in FT. Drum to see if I can reach back to 145-46 mark.

On 1 of the SPLW12 subs it looks like glue melted, the glue ran down the hole in the magnet, but I cant see where its messed up???

req
06-12-2005, 11:14 PM
cmon dude. take a freakin picture instead of trying to show us whats wrong.

:p:

check this thread for some updates on my car;
http://forums.caraudio.com/vb/showthread.php?t=103185

SPL140.2
06-12-2005, 11:22 PM
cmon dude. take a freakin picture instead of trying to show us whats wrong.

:p:

check this thread for some updates on my car;
http://forums.caraudio.com/vb/showthread.php?t=103185


batteries are on the charger ill post them up tomorrow ;)

req
06-12-2005, 11:33 PM
Now Nukkka! Now!

SPL140.2
06-13-2005, 05:24 PM
Heres the pic of the dust cap the other sub looks just like it.

http://img249.echo.cx/img249/7849/img02569rh.th.jpg (http://img249.echo.cx/my.php?image=img02569rh.jpg)

Here you can see the glue in the hole in the magnet. You cant tell in the pic but it is a brown color inside the hole, but the subs arnt blown. Must be a heat stain or something.

http://img249.echo.cx/img249/8373/img02550vo.th.jpg (http://img249.echo.cx/my.php?image=img02550vo.jpg)


heres another
http://img249.echo.cx/img249/2/img02596gr.th.jpg (http://img249.echo.cx/my.php?image=img02596gr.jpg)

I think the sub got so hot it melted the glue, looking from the outside you cant see if any damage has been done :crap:

Im gonna use the SPLML12's for the fort drum show and maybe put up some magic smoke :)