PDA

View Full Version : box is a little too tall, f@$k!!!!!!!!



MattSWE
06-10-2005, 08:21 PM
I just fitted my box in the 91 camry and the top edges of the box get caught on some of the rounded areas at the top of the trunk.

I think I can get anound this by rounding off the top edges and sides of box.

Again the box will slide all the way back, barley with the top off, then when I put the top on, it wouldn't slide back at all.

any ideas?

flakko
06-10-2005, 08:24 PM
err slice the top off, and shorten it. it will change the volume, tuning (if its ported), but as long as it fits rite?

got pix?

InhumanAcura
06-10-2005, 08:36 PM
sledge hammer? saw-zall?

BeanII
06-10-2005, 08:39 PM
any ideas?


uh, measure twice. cut once.

flakko
06-10-2005, 08:40 PM
^^^x2

or you can just build a new one.

MattSWE
06-10-2005, 08:43 PM
know that I think about it, I dont have to slide it back that extra 4 inches aginst the seat.

Logikalliquid
06-10-2005, 09:08 PM
Maybe you can mount your amps in that empty space?

dbornotdb
06-10-2005, 09:12 PM
If it is just the corners, you can set the saw at a 45* angle and cut it down. Or get a router and a 1/2" roundover bit and trim it like that.

Rattlebrain
06-10-2005, 09:15 PM
use a rasp to file down the edges

MattSWE
06-10-2005, 09:15 PM
thats the ticket!!!!!!!, thanks very much