PDA

View Full Version : OMG! lemans23 shows his setup! 56k, **** one



PV Audio
06-03-2005, 03:00 PM
hey all, finally got a digi cam (konica minolta dimage z3, dad wouldn't let me buy rebel 300d cause i've been spending 2 much $$$)

so here they are:

DIY TMM towers w/ full range (pairs, others not shown)
http://img97.echo.cx/img97/7310/picture0220gy.jpg (http://www.imageshack.us)

Advent AS2 Towers w/ Kenwood VR-707A receiver and Pioneer FD-1009 300 Disc player..Dayton 4 pair speaker selector
http://img97.echo.cx/img97/1271/picture0238qt.jpg (http://www.imageshack.us)

Teh Pyramid HYPER PRO w/ PE 270 watt amp
http://img157.echo.cx/img157/1170/picture0269rk.jpg (http://www.imageshack.us)

Dayton titantic 15" w/ PE 1000 watt amp
http://img19.echo.cx/img19/9811/picture0271ad.jpg (http://www.imageshack.us)

Random **** (dayton 10" somehow shorted out and caught on fire IN MY ROOM, luckily, only the carpet was mildly singed :) )
http://img157.echo.cx/img157/444/picture0282sd.jpg (http://www.imageshack.us)

Teh iPod
http://img224.echo.cx/img224/3428/picture0317ve.jpg (http://www.imageshack.us)

Shure E3c with delicious detail :yumyum: :yumyum:
http://img224.echo.cx/img224/6113/picture0338nc.jpg (http://www.imageshack.us)

PV Audio
06-03-2005, 03:02 PM
Dayton 6.5" Book/Towers DIY (xbox)
http://img224.echo.cx/img224/5897/picture0361ep.jpg (http://www.imageshack.us)

Grandfather's integrated amp (xbox)
http://img224.echo.cx/img224/2958/picture0373jy.jpg (http://www.imageshack.us)

Sony SA-WM500 (xbox)
http://img157.echo.cx/img157/4629/picture0380mb.jpg (http://www.imageshack.us)

thats it!

bcarpenterfhl
06-03-2005, 03:02 PM
got carpet?

PV Audio
06-03-2005, 03:04 PM
got carpet?
**** carpet, turn off the **** lights :D

squeak9798
06-03-2005, 03:04 PM
Well, it's painfully obvious that you've yet to master the art of cabinet construction ;)

Beat_Dominator
06-03-2005, 03:05 PM
Lemans is so ghetto :laugh:

req
06-03-2005, 03:05 PM
your boxmaking skills need to be improved, or those DIY's need to be carpeted :)

how much did you spend on those DIY stands

PV Audio
06-03-2005, 03:07 PM
your boxmaking skills need to be improved, or those DIY's need to be carpeted :)

how much did you spend on those DIY stands
yeah i **** at building mainly because i'm using a 14 dollar jigsaw hehe

the stands cost 5.99 each at biglots, the one with the TMM and full range was on top of my MTX SW2, however.

cjjackson85
06-03-2005, 03:07 PM
iPod & Shure buds? That's an oxymoron if I've ever heard one... My E5s love my iRiver H10 though...

PV Audio
06-03-2005, 03:07 PM
Lemans is so ghetto :laugh:
**** it, they sound amazing. a few extra tubes of sealant never hurt anyone :D

PV Audio
06-03-2005, 03:08 PM
iPod & Shure buds? That's an oxymoron if I've ever heard one... My E5s love my iRiver H10 though...
??? i love the e3s on teh ipod...whats the problem?

Beat_Dominator
06-03-2005, 03:11 PM
Just get some carpet man! Or learn to venerr, it really isn't that hard. You're killin' me!! :laugh:

squeak9798
06-03-2005, 03:14 PM
Just get some carpet man! Or learn to venerr, it really isn't that hard. You're killin' me!! :laugh:

Not much he can do since he has giant lumps of silicone all over them...........

He needs to just learn how to construct one properly....you know, like with joints that actually sit flush with each other :laugh:

Beat_Dominator
06-03-2005, 03:15 PM
He can use a sander, I have faith in young lemans.

PV Audio
06-03-2005, 03:15 PM
Just get some carpet man! Or learn to venerr, it really isn't that hard. You're killin' me!! :laugh:
dude, i'm not taking that **** apart or unscrewing the drivers cause they sound excellent and i prefer having people talk **** about 'em by appearance and hear them and be like WTF! than have them look great and sound fair. i've had them for a good 2 months. most recent was the hyper pro, and its not worth carpeting :D

squeak9798
06-03-2005, 03:16 PM
Sander ain't going to help you when a board is 1/4" too short :D

PV Audio
06-03-2005, 03:16 PM
Not much he can do since he has giant lumps of silicone all over them...........

He needs to just learn how to construct one properly....you know, like with joints that actually sit flush with each other :laugh:
hey don't laugh...but yes they are sealed excellently. i have no saw to make precision cuts tho

squeak9798
06-03-2005, 03:17 PM
Straight edge + clamps = straight cuts on board.

Not rocket science.

PV Audio
06-03-2005, 03:19 PM
Straight edge + clamps = straight cuts on board.

Not rocket science.
if can make a straight cut with my saw, i'll give u 50 dollars. no ****, the blades come out after every cut. got it for 14 bucks, like 1989 model or something :laugh: . i'm making a folded horn cabinet for a 10" pos i picked up and its being constructed by my neighbor (doctor and carpenter w/ workshop in his basement) so that'll look beautiful

vosschs
06-03-2005, 03:20 PM
if can make a straight cut with my saw, i'll give u 50 dollars. no ****, the blades come out after every cut. got it for 14 bucks, like 1989 model or something :laugh: . i'm making a folded horn cabinet for a 10" pos i picked up and its being constructed by my neighbor (doctor and carpenter w/ workshop in his basement) so that'll look beautiful
well stop bit(hin and buy a new fuvkin saw

req
06-03-2005, 03:22 PM
no lemans. i meant the fullrange towers. the DIY ones you made. how much did it cost (total) to build, and how are you crossing them over :p:

PV Audio
06-03-2005, 03:22 PM
well stop bit(hin and buy a new fuvkin saw
:( i have no money after buying a camera

squeak9798
06-03-2005, 03:22 PM
well stop bit(hin and buy a new fuvkin saw


:word:

I would have picked up a new saw rather than a digi cam. The 'cam can wait; a new saw for you obviously can't :crap:

PV Audio
06-03-2005, 03:24 PM
no lemans. i meant the fullrange towers. the DIY ones you made. how much did it cost (total) to build, and how are you crossing them over :p:
:confused: :confused: thats 2 separate ones....the one with the white cones and the tweet is separate from the bronze cone. the bronze cone is the full range (obviously :D ) which one were u talking about?

PV Audio
06-03-2005, 03:25 PM
http://konicaminolta.com/products/consumer/digital_camera/dimage/dimage-z3/index.html

teh hotness, but in black

zachzchw
06-03-2005, 03:27 PM
Your Dad tells you how much money you can spend??

PV Audio
06-03-2005, 03:30 PM
Your Dad tells you how much money you can spend??
no but he thought i was getting shady (obviously not exact words) if i can spend all this money. he thought i was a dealer or something, so i opted for the bargain model

BeanII
06-03-2005, 03:32 PM
hey all, finally got a digi cam (konica minolta dimage z3, dad wouldn't let me buy rebel 300d cause i've been spending 2 much $$$)


Maybe you should invest in................... hmmmmm I don't know, a saw? :laugh:


Either that or I'm going to buy stock in a silcone company. hahah :D

PV Audio
06-03-2005, 03:33 PM
Maybe you should invest in................... hmmmmm I don't know, a saw? :laugh:


Either that or I'm going to buy stock in a silcone company. hahah :D
HAHAHAHA **** you :mad: :mad:














































:D

cjjackson85
06-03-2005, 04:49 PM
??? i love the e3s on teh ipod...whats the problem?
All 3 iPods i've had can't even compete with the SQ on my iRiver DAPs... You'd be surprised how much better iRivers sound... Want a 6gb mini silver? :uhoh:

PV Audio
06-03-2005, 04:50 PM
no dude, my 20 gig is full...why would i want a 6?

cjjackson85
06-03-2005, 04:53 PM
Maybe because your 20 is full, better battery life, smaller in size, 3 year BB warranty, take your pick...

PV Audio
06-03-2005, 05:04 PM
no i'm going to sell it and get a 40 lol i dont want to switch between ipods

audiolife
06-03-2005, 06:40 PM
you failed wood shop didnt you? get a rip fence then it dont matter how bad your jig saw is. i wouldnt show off the glob series speakers on line seriously, especially if you are seriously telling people you design speaker systems is flat scarey. see noone can hear them on line and i can pretty much tell you noone wants that in their living room lol. i know you are young but this is the stage in life where you start developing common sense in figuring out cabnet making (you are old enough to do it and hey you like homemade home stuff). dont think im trying to insult you (i know this stuff matters to you because of how you went about building it) take it as you know you can do better and if you dont you will be made fun of until you get it right lol.

PV Audio
06-05-2005, 01:00 AM
you failed wood shop didnt you? get a rip fence then it dont matter how bad your jig saw is. i wouldnt show off the glob series speakers on line seriously, especially if you are seriously telling people you design speaker systems is flat scarey. see noone can hear them on line and i can pretty much tell you noone wants that in their living room lol. i know you are young but this is the stage in life where you start developing common sense in figuring out cabnet making (you are old enough to do it and hey you like homemade home stuff). dont think im trying to insult you (i know this stuff matters to you because of how you went about building it) take it as you know you can do better and if you dont you will be made fun of until you get it right lol.
:eyebrow: :eyebrow: u wanna fight?














:D yeah i seriously have a floppy hand and can't cut anything for ****, let alone having a saw that loses its blade :uhoh: :uhoh: but the designs were perfect and that's what matters to meh.

audiolife
06-05-2005, 08:07 AM
get a rip fence they are 20-40 bucks. if you cant cut straight with a rip fence there be sumthin wrong with you lol.

PV Audio
06-05-2005, 11:43 PM
get a rip fence they are 20-40 bucks. if you cant cut straight with a rip fence there be sumthin wrong with you lol.
:crazy: gotta link?

squeak9798
06-05-2005, 11:45 PM
Man....I live like 1.5hrs north of you. You can come use my table saw for $5/hr rent next time you wanna build something ;)

PV Audio
06-06-2005, 12:02 AM
Man....I live like 1.5hrs north of you. You can come use my table saw for $5/hr rent next time you wanna build something ;)
:crap: :crap: :crap: i've heard you rape people :crap: :crap: :crap: *james told me*

audiolife
06-06-2005, 08:16 AM
just go to sears or about any tool place

PV Audio
06-06-2005, 01:35 PM
k i'll check 'er out today. thanks fo teh tips

audiolife
06-06-2005, 03:30 PM
it'll makw it more fun for you thats for sure. with a little practice i would thinkyou could do what you want to do within a few days.

audiolife
06-06-2005, 07:04 PM
most of all is have fun. once you get to the point of getting things straight an using wood glue and just a little silicon on the INSIDE you will gain that much more love of the craftsmanship side of it and show off to your neighbor. you get to that point (shouldnt take too long especially in the summer months) i would think even he would become envious especially if you start using hardwoods. you get to that point you can make bank especially in indy.

squeak9798
06-07-2005, 04:03 PM
:crap: :crap: :crap: i've heard you rape people :crap: :crap: :crap: *james told me*

He liked it at the time........

:naughty:


:eyebrow:

Diplexers
06-11-2005, 03:17 AM
\ i prefer having people talk **** about 'em by appearance and hear them and be like WTF! than have them look great and sound fair.
Agreed, 100 percent. Ok, 97.463 percent! :)