PDA

View Full Version : Port options



ruckus
05-23-2005, 07:40 PM
ok I have a layout like option A of the picture but i want option B so i have more room around my sub. would the lengths of the sticks need to be the same length as the single stick in A or do i need to count the open spaces in the measurement?

http://www.newbreedhosting.com/box.gif

baronfootballer
05-23-2005, 07:55 PM
srry i dont meen to bust onto ur thread but once ur done answering his q i have one. ok if u have the same amount of port are and stuff n the L port as th eother one ...does it matter which one u use?

DOHCrazy
05-23-2005, 08:07 PM
Most of the time a snake port is used so the port opening isnt behind the sub.

You can use either design, but use the one where the port is as far away from the rear of the sub as possible.

Both designs will sound the same if built to proportional specs.

ruckus
05-23-2005, 08:50 PM
and my question you know the answer? do the green of a and b measure out the same size or would i count the 2 inches between the sticks as 2" of port? or the 3/4" ends as port?

baronfootballer
05-23-2005, 08:57 PM
thanks