PDA

View Full Version : Check my dimensions?



squeak12
05-22-2005, 09:48 PM
Building a box for my 15" Brahma tuned to ~28Hz. It is 4.25 cu.ft. internal with exterior dimensions of 38x18x18. The port is 15.75x3 and 35 inches long. To make the port 15.75 Im going to place a piece of 3" wide mdf on the bottom piece and nail the port walls to it. The following are sizes of the pieces to be cut.
(2) 16.5x16.5(outsides)
(2) 36x18(front and back)
(2) 36x16.5(top and bottom)
(1) 17.25x3(bottom of port 1)
(1) 17.75x3(bottom of port 2)
(1) 16.5x13.5(port wall 1)
(1) 16.5x17(port wall 2)

squeak12
05-24-2005, 03:37 PM
bump

squeak12
05-28-2005, 02:52 PM
Bump