I have 2 JL 10w6v2's and I put an order in for 2 MB Quart PCE 216's. My question is, what amps and/or wattage do I need to get the most out of them. I'm planning on just turning the rear factory speakers way down and putting the subs in a sealed enclosure. I'm considering JL 1000/1 for the subs and JL 300 for the satellite speakers, but I'm open to suggestions... If I can save some money without sacrificing quality, I would jump at the idea. My understanding from the specs, is that the JL amps operate at the same wattage regardless of ohms and volts... This also leads me to ask, will this setup put too much of a drain on my battety and alternator? Thanks in advance for the help.