If i have 2 subs which run at 400rms each and DVC and are 2ohm each what amp should i use? They are Rockford fosgate P2D2-12. Sorry im a little retarded when it comesto this stuff :p. All suggestions welcome!

Printable View

- 12-27-2013monarch8Simple amp question
If i have 2 subs which run at 400rms each and DVC and are 2ohm each what amp should i use? They are Rockford fosgate P2D2-12. Sorry im a little retarded when it comesto this stuff :p. All suggestions welcome!

- 12-27-2013bbeljefeRe: Simple amp question
Those subs can be run at 1Ω each or 4Ω each, which leave you with either a .5Ω or 2Ω final impedance. Since most smaller monoblocks don't do well at .5Ω, you'll want to find an amp that does ~800 watts at 2Ω.

The CT Sounds 1400.1 will do that and a bit more at 2Ω and the 900.1 will do close to it for a bit less money. - 12-27-2013monarch8Re: Simple amp question
800 watts max or rms? Thanks by the way

- 12-27-2013bbeljefeRe: Simple amp question
RMS. Max power is a useless and irrelevant number.

- 12-27-2013n2audioRe: Simple amp question