But distortion is just a matter of gain setting. No amp "has distortion" it's what you set it to. Even a zapco can have 10% THD if you crank the gains way up. That's what an oscope or DD-1 is for. 1% THD is not audible as its barely distorted even on a ten thousand dollar oscope
^^BLACK AND BLUE^^
4.5 Cubes Tuned to 29Hz
Two BtLN212D2s on (two 2.5ks)***update now on four IA 20.1s at .175 ohms each
(Four XS D1400s)***update now eight XS D1400s
Lots of mids n highs
H.U. - Pioneer P7200HD
Fronts - Pioneer premier TS-C720PRS
Rear - Pioneer TS-D6902R
Amp - kx2500.1
Sub - AQ HDC4 12
just a lil' slam for now.... tuned to 33hz!!!!!
complete budget system under 400.00... (kenwoods)
ct sounds is 4k at 12.8 volts... and 5.5k at 14.4v, unless we are running higher voltage setups, i dont think the Soundqubed amp and the ct 4000.1 are in the same league. hence the massive price difference.
Clip city b1tch, clip clip city b1tch. 10's, 12's, 15's, goin up in flames b1tch.
Subs : SSA Zcon 12 in a 3.25 cube tuned to 33
Sub amp: hifonics brx 2400.1D
Mids/Highs: PPI ION 520.4 - bought from trumpet
Headunit: Pioneer 80PRS
Front stage: Phd FB 6.1 6.5 mids with jbl ms-62c tweets and crossovers on 130 rms each.
singler 180 amp alt with kinetik hc1800 under the hood and 2 hc 2400 in the trunk.
Went with the ct.