Ok so I bought an amp that's broken off of cl and it needs repair the amp goes straight into protection mode and there are some obvious issues and I tried to patch it up but dosent seem to want to leave protection mode all fets are fine but 2 capacitors on the board are swollen but still charge up c487 and c489 the rest of the larger capacities farther down seem fine but are a bit swollen too the negative trace on the bottom of the board however literly split in 2 from over heating i tried to just jump the trace and see if it would start back up but nothing happend and i tried removeing the caps but before I replace them I wanted to know if anyone would know what's the actual issue power supply seems fine getting 100+ volts out of the 2 prong d444-d447 any help I'm clueless need help!!!! amp repair mtx thunder 81000d-amp3.jpgneed help!!!! amp repair mtx thunder 81000d-amp2.jpgneed help!!!! amp repair mtx thunder 81000d-amp1.jpgClick image for larger version

Name:	AMP3.jpg
Views:	15
Size:	34.9 KB
ID:	26533344Click image for larger version

Name:	AMP2.jpg
Views:	16
Size:	41.8 KB
ID:	26533343Click image for larger version

Name:	AMP1.jpg
Views:	16
Size:	39.5 KB
ID:	26533342Click image for larger version

Name:	AMP3.jpg
Views:	15
Size:	34.9 KB
ID:	26533344Click image for larger version

Name:	AMP2.jpg
Views:	16
Size:	41.8 KB
ID:	26533343Click image for larger version

Name:	AMP1.jpg
Views:	16
Size:	39.5 KB
ID:	26533342