Need the right specs for a amp to work for my new subs

[jaysopro]

The subs I got

Kicker DC124 (10DC124)
Dual 12" Comp Series Loaded Subwoofer Enclosure with 4 ohm Final Impedance


Subwoofer Specifications
Subwoofer Size 12"
Voice Coil(s) Single
Impedance (Per Voice Coil) 8 ohms
RMS Power Handling 150 watts
Total RMS Power Handling 300 watts
Peak Power Handling 300 watts
Total Peak Power Handling 600 watts
Woofer Composition SoloKön
Woofer Surround Ribbed Poly-Foam
Sensitivity 88.3 dB
Frequency Response 27 - 500 Hz
Xmax (millimeters) N/A
Enclosure Specifications
Box Type Vented / Ported
Number of Subs/Speakers 2
Box Style/Shape Hatchback Style, Angled Back
Height 16"
Width 32-7/16"
Depth 13-7/8"
Second Depth 17-1/4"
Wood Thickness 3/4"
Number of Terminals 2
Terminal Type Spring posts
Box Exterior Color Black
Box Finish Carpet

[dragonrage]

Aura RPM2300 RPM Stage 2 Mobile Amplifier 2x150W 269-189

Bridge that. Edit to note: Yes, while you may never have heard of Aurasound, it is a good brand. That amp is normally a good bit more expensive but since it's a factory buyout (basically a clearance sale), it's cheap! It will provide the right amount of power at the right impedance for those subs. If you upgrade to higher power subs later, no problem - the amp can convert to be used as an amp for your front speakers and you can get a more powerful subwoofer amp. (Or, really, it's not like the amp can't drive more powerful subs, just that there's no reason to get more powerful subs without also getting a more powerful amp.)

[jaysopro]

Could u recommend me like what type of watts i should be looking for and how many channels?

[dragonrage]

Anything that provides 300 watts RMS or higher at 4 ohms. Most 1-channel ("monoblocks") have advertised power ratings given at 1 or 2 ohms and will be significantly less at 4 ohms so be sure to check. Stereo amps can almost always be bridged to run in mono mode. The amp that I linked is a good amp at a really good price that provides the perfect amount of power for your subs and would also be perfect for your fronts in the future if you upgrade. I recommend it. I feel you can't get anything else to match its value unless you go used.

[jaysopro]

The subs I'm getting is 2 12" kickers outputting 300w each and idk about the ohms, if its separate or together its says its 8 ohms

[jaysopro]

Im thinking about getting 2 mono channel amps for cheap
This is the one im looking at. below
Sound Storm Laboratories F1200M SSL FORCE

[dragonrage]

No, forget the max power. Go by RMS only. And forget that. Soundstorm is low quality. What do you not like about my advice?

[jaysopro]

ive tried looking for that brand but the ones i only find are used and low watts
Im not sure what to get can you like give me description of a good amp for example so i can find a good one or u could recommend another brand

[dragonrage]

I gave you a link to a good one at a store you can buy it from. Are you looking for one you can buy locally?

[jaysopro]

where is the link
not really i dont mind buying online its gives me more variety to look at

[dragonrage]

in my first reply

[jaysopro]

would that work for the subs i got
did you look at them?
im trying to spend about $110-$130
if i were to get it now
$125-$150
would be around friday when i get paid

[dragonrage]

I looked at your subs and the amp that I linked is matched very well to them. Actually, it's a bit more powerful than the subs are (if they aren't underrated). But that's fine. It's a great match and a great price and a great amp.

[mylows10]

noob society going on here !!!!

[jaysopro]

Ima get it then Ima take it word for it

And yeah I'm new to all this but I'm a real tech head to things lol